5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Offroad Package +1/2" spacer

RGrant27

Member
Joined
Jan 13, 2021
Messages
10
Reaction score
2
Points
3
Age
34
Hi guys, I have a new built to serve Ram I am looking at adding a 1/2" spacer to. Has anybody ran this setup? Did it net you the 1/2"? I want to stick 285/65s on the stock wheels which i believe will fit stock. Id like to stay with the least amount of lift so i dont have to do UCAs
Thanks!
 
If I’m not mistaken, Wulf and Motofab have 1/2” front spacers. I might be getting a set with my Bilstein 5100s and ORP springs. I’m looking to net 3” up front but don’t want to max out the Bilsteins so I want to add the spacer and run them at setting 4.
 
i have motofab 1/2in added to my suspension setup, they were around 30-40$ shipped. netted a true additional 1/2in.
 
i have motofab 1/2in added to my suspension setup, they were around 30-40$ shipped. netted a true additional 1/2in.
Thank I for that info!
did you get a full 2 1/2” of lift in the rear from the gladiator springs?
 
Thank I for that info!
did you get a full 2 1/2” of lift in the rear from the gladiator I ha

Thank I for that info!
did you get a full 2 1/2” of lift in the rear from the gladiator springs?
i had the orp springs so I was already 1 inch up. i gained 1.5 from the gladiator springs keeping some rake.
 

Users who are viewing this thread

Back
Top