5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Newbie Adding a Subwoofer

jdol78

Member
Joined
Jul 29, 2024
Messages
5
Reaction score
0
Hello All, Newbie here. Just purchased a 2021 RAM 1500 Big Horn. I'm want to add a subwoofer/amp combo so I purchased the Rockford Phosgate P300-10T. My question is are there RCA outputs on the back of the 8.4 inch Uconnect head unit? Thanks in advance and I hope this isn't a stupid question. Cheers
 

RichInMN

Active Member
Joined
Nov 16, 2018
Messages
179
Reaction score
164
Location
Minnesota BRR!
Are there RCA outputs on the back of the 8.4 inch Uconnect head unit?
No RCAs - the exact process will depend on whether you have the "Base 6" system or the "Alpine" Canbus system. If you have the Base 6 you can use the built-in LOC on that powered sub.
 
Last edited:

jdol78

Member
Joined
Jul 29, 2024
Messages
5
Reaction score
0
The powered sub has one connection and the connector Y's into two RCA's
 

RichInMN

Active Member
Joined
Nov 16, 2018
Messages
179
Reaction score
164
Location
Minnesota BRR!
The powered sub has one connection and the connector Y's into two RCA's
Your sub has a built-in LOC for high-level input. Maybe you can reach out to Rockford Fosgate, or the place you bought the sub, or someone else local and experienced for help or further instructions with the install. Good luck!

1722348928369.png


p.s. Don't forget to bypass or disable your ANC
 
Last edited:

jdol78

Member
Joined
Jul 29, 2024
Messages
5
Reaction score
0
I have the ANC jumper. Thank you for your advice. One more question, where is the amplifier located? Is it under seat?
 

LITTLEREBEL

Well-Known Member
Joined
Aug 30, 2019
Messages
246
Reaction score
256
Location
South Louisiana

I am pulling the Rockfod Fosgate meastro out of my truck and going with this PAC/EZY setup. It connects behind the radio and I will run an optical cable to my DSP. From the DSP I will run RCA's to the amps.
 

jdol78

Member
Joined
Jul 29, 2024
Messages
5
Reaction score
0

I am pulling the Rockfod Fosgate meastro out of my truck and going with this PAC/EZY setup. It connects behind the radio and I will run an optical cable to my DSP. From the DSP I will run RCA's to the amps.
Do you know where the stock amp is located in my truck? I'm seeing under seat or under dash
 

Users who are viewing this thread

Top