New wheels/tires

[elarson6772]

Hi all!
I have a 2021 Laramie crew cab 4x4 with the night package as well as off road package ordered. Upon delivery it will get the Mopar 2” lift installed as well.

I have done a ton of searching with a ton of different viewpoints found so I came here to try to get final clarification.

First I want Nitto Ridge Grappler tires on it. Will 35’s fit without issue with the Mopar 2” lift? What width? I want no rubbing issues and no wheel well mods needed.

Secondly, what rim offset do I run with them to get the tires sticking out a bit more but not crazy? What is the factory offset?

thanks in advance! Pics/ideas welcome.
Er

 

[Smashius]

You'll find it can vary truck to truck with regards to rubbing, every one is a little different.

I have a Rebel with a 2" level, and I 'm going 285/65r20 which are 11.5" wide to hopefully avoid any trimming. Hopefully.

My wheels are currently on order and being made, I went 20x9 +0, going for the same look you're asking for. The stock wheels I'm replacing are 18x8 +19.

 

[Kibro2]

You'll find it can vary truck to truck with regards to rubbing, every one is a little different.

I have a Rebel with a 2" level, and I 'm going 285/65r20 which are 11.5" wide to hopefully avoid any trimming. Hopefully.

My wheels are currently on order and being made, I went 20x9 +0, going for the same look you're asking for. The stock wheels I'm replacing are 18x8 +19.

Same set up I have now and absolutely no rubbing at all.

 

[Smashius]

Same set up I have now and absolutely no rubbing at all.

I'll be thrilled to get no rubbing and the same stance as your truck, it looks great (and was actually the reason I went with a 0 offset)!

Any chance I can get you to take a pick straight on to see how far out they sit?

My wheels are supposed to be made the week of the 15th, so I'm getting excited!

 

[Kibro2]

I'll be thrilled to get no rubbing and the same stance as your truck, it looks great (and was actually the reason I went with a 0 offset)!

Any chance I can get you to take a pick straight on to see how far out they sit?

My wheels are supposed to be made the week of the 15th, so I'm getting excited!

Appreciate it... this is the best I have but can take more tonight to show you how it sits compared to fender flares. Thx

 

[Smashius]

Appreciate it... this is the best I have but can take more tonight to show you how it sits compared to fender flares. Thx

Yea, that's pretty much dead on the look I want. Not super interested in the diesel style -44 with spacers look, but just a tiny poke would be great. Thanks again!