New member here, NW AR

[MinionHauler]

What's up everyone. Name is Kevin, from Northwest Arkansas. I've had my 2020 Laramie Sport since last April. I got to work pretty quick on it and made a bunch of upgrade:
* Nfab steps
* Gator EFX Tonneau
* 22" Sport Wheel swap with Terras
* Tint
* AudioControl D6.1200, LC 1.800, ACM 2.300 amps
* AudioFrog GS10, GS25, GS690 front stage active
* GS10 and GS25 are in 3D printed pods where the factory speaker grille goes
* Infinity Reference 6x9 2 way rears
* (4) 8" Image Dynamics ID8 sealed
* PAC AP4-CH41 R.2 with APH-CH03 for integration
* Swapping out the GS690s for GS8ND2 8" midbasses soon
* Disabled headliners and center Alpine speaker
* Waiting on my Billstein 5100s to level front.

* I've also built around 5 other boxes for these trucks so you can retain the ram bin. I do sell them but take months to complete 1 since it isn't my M-F job and I have a family. So I just burn the midnight oil whenever I can and crank them out.

 

[CMil527]

Nice rig.. welcome!

 

[Fatherof3]

Welcome to the forum . Your truck looks awesome !!

 

[Lufty]

nice.. Welcome!

 

[MinionHauler]

Welcome to the forum . Your truck looks awesome !!

Thanks man! I'm a father of 3 too, all with car seats lol

 

[MinionHauler]

Nice rig.. welcome!

Appreciate it!

 

[triple_B]

I'm in the opposite NE corner of AR from you. Very nice looking install and sub box, having built plenty of enclosures over the years I can appreciate the amount of time and work that goes into making an enclosure look that clean. I really like that you made it clear the in floor storage and am curious how well that design would work with the all weather mats.

 

[Papa Red]

Welcome to the forum.

Red

 

[MinionHauler]

I'm in the opposite NE corner of AR from you. Very nice looking install and sub box, having built plenty of enclosures over the years I can appreciate the amount of time and work that goes into making an enclosure look that clean. I really like that you made it clear the in floor storage and am curious how well that design would work with the all weather mats.

Sweet! Blytheville?

Appreciate the compliment. Have been building off and on for a while now, was an installer back in the early/mid 2000's

Floor mats are not too hard, I'm actually doing one really soon for a Bighorn with floor mats. Just have to section the bottom into 2 pieces and create a 3/4" lip.

 

[triple_B]

Sweet! Blytheville?

Appreciate the compliment. Have been building off and on for a while now, was an installer back in the early/mid 2000's

Floor mats are not too hard, I'm actually doing one really soon for a Bighorn with floor mats. Just have to section the bottom into 2 pieces and create a 3/4" lip.

Jonesboro area,

Would love to see some pics of that one when you get it done! When you say floormats, does the bighorn have the all weather mats or are they the carpeted style. The all weather mats are much stiffer than the carpeted set so I don't know how easily they would fold at the corner.

 

[MinionHauler]

Jonesboro area,

Would love to see some pics of that one when you get it done! When you say floormats, does the bighorn have the all weather mats or are they the carpeted style. The all weather mats are much stiffer than the carpeted set so I don't know how easily they would fold at the corner.

These will be for the MOPAR rubber mats. I just leave the bottom flat for the factory carpet one.

 

[Walski]

What's up everyone. Name is Kevin, from Northwest Arkansas. I've had my 2020 Laramie Sport since last April. I got to work pretty quick on it and made a bunch of upgrade:
* Nfab steps
* Gator EFX Tonneau
* 22" Sport Wheel swap with Terras
* Tint
* AudioControl D6.1200, LC 1.800, ACM 2.300 amps
* AudioFrog GS10, GS25, GS690 front stage active
* GS10 and GS25 are in 3D printed pods where the factory speaker grille goes
* Infinity Reference 6x9 2 way rears
* (4) 8" Image Dynamics ID8 sealed
* PAC AP4-CH41 R.2 with APH-CH03 for integration
* Swapping out the GS690s for GS8ND2 8" midbasses soon
* Disabled headliners and center Alpine speaker
* Waiting on my Billstein 5100s to level front.

* I've also built around 5 other boxes for these trucks so you can retain the ram bin. I do sell them but take months to complete 1 since it isn't my M-F job and I have a family. So I just burn the midnight oil whenever I can and crank them out.
View attachment 102460View attachment 102465

View attachment 102458

View attachment 102466
View attachment 102467
View attachment 102468
View attachment 102469
View attachment 102470

View attachment 102471

Am

 

[Walski]

Beautiful build..I need some pods like that. Did you make them?