Need help identifying bed cover

[biggggant]

I just picked up a 2019 rebel that had a retractable bed cover but the dealership did not have the keys so I would like to reach out to the manufacture to see about getting new keys. I have attached some pics but let me know if more pics are needed.

 

[MannyN]

I would just drive by a locksmith and have them make you a new key.

 

[biggggant]

yea that is my next option but I saw that retrax sold replacement keys but I didn't see the code I had on their list so I was thinking it might be another manufacture

 

[ekaz]

That looks like a truck covers usa cover, they have the strap but don't think they have the lock in that spot.

American Roll Cover – Truck Covers USA

www.truckcoversusa.com

 

[biggggant]

thanks! Looks like their box is not level with the cover so it might be different but I appreciate it,

 

[biggggant]

I think I found it SyneTrac-Pro Off Road Retractable Tonneau Cover (Short Bed)

 

[OCD Solutions]

I was gonna say, google images and 30 seconds later

High-Quality and Weatherproof Tonneau Cover | SYNETICUSA

Syneticusa offers you low-profile patented design, incredibly strong, and easy to use. Our covers are all UV protected, no fading, and backed by a 5 years warranty! All hardware are included and the installation time is around 1 hour to 2 hours depends on the model.

www.syneticusa.com

 

[jl13]

I think I found it SyneTrac-Pro Off Road Retractable Tonneau Cover (Short Bed)

that is what I have and going by your pictures I would said that is correct

 

[biggggant]

found out they don't sell keys but the locks would only be $30. So I will check with a locksmith first

 

[OCD Solutions]

Given they point straight up and could collect moisture and corrosion, maybe $30 for a new lock isn't such a bad idea.

 

[biggggant]

Given they point straight up and could collect moisture and corrosion, maybe $30 for a new lock isn't such a bad idea.

good point

 

[firemanjay]

that is what I have and going by your pictures I would said that is correct

Did the bed cover work ok with your rails, site says wont work with BUG rails? Any pics you can share of the clamps

 

[biggggant]

Did the bed cover work ok with your rails, site says wont work with BUG rails? Any pics you can share of the clamps

I dont notice any issues. I will take some pics in a little bit

 

[biggggant]

The rails for the bed cover are far from the bug rails

 

[firemanjay]

The rails for the bed cover are far from the bug rails

Thanks for the pics, have seen different clamps, and have read they are about 3.5" long

 

[biggggant]

Thanks for the pics, have seen different clamps, and have read they are about 3.5" long

Yes, there are probably a whole lot of different clamps amongst all of the manufacturers.

 

[jl13]

Thanks for the pics, have seen different clamps, and have read they are about 3.5" long

confirm, no issues on my side either, cover works properly with out any obstruction

 

[GAscooter]

You could also try lostakey.net.

 

[TSL]

I think I found it SyneTrac-Pro Off Road Retractable Tonneau Cover (Short Bed)

@biggggant , question on how much space this cover takes up in your bed ? In particular, how much clearance is there from the bottom of the canister to the bed of the truck. From one of the pics you posted, looks like there's still quite a bit of space. I'd been considering the Retrax cover, but their canister is quite a bit larger ( 13.5" x 12" I think ), it looks from Synetrac's website that their's is about 9" x 9".
With the short bed truck I'm thinking the canister dimensions could be a concern.

 

[biggggant]

@biggggant , question on how much space this cover takes up in your bed ? In particular, how much clearance is there from the bottom of the canister to the bed of the truck. From one of the pics you posted, looks like there's still quite a bit of space. I'd been considering the Retrax cover, but their canister is quite a bit larger ( 13.5" x 12" I think ), it looks from Synetrac's website that their's is about 9" x 9".
With the short bed truck I'm thinking the canister dimensions could be a concern.

there is approx 13" below the canister and just in case anyone was wondering they sent me 2 complete lock mechanisms for $30 since I didn't get the keys from previous owner