Need help finding where to tap wire

[Jbenevides89]

I am in the middle of adding an aux switch panel inplace of my sunglasses holder. I would like to tap the lights in the switches into the dimming circuit but cant find anything about where to find a wire for it. If its not possible I would like to hook it to the circuit that turns the headlights on at least so the lights in the switches only come on at night.

 

[Jbenevides89]

 

[Ratchet]

Abient lighting circuit + should be a WHT/GRN (white/green) wire in the harness up there.

 

[Moosefire66]

Holy moly how many lights do you have on that truck

Sent from my SM-G991U1 using Tapatalk

 

[Jbenevides89]

Holy moly how many lights do you have on that truck

Sent from my SM-G991U1 using Tapatalk

Switch for pods/ditch lights
Switch for LED Bar
Switch for footwells so I can run dim red at 2 am trying to find guns in the back while night hunting. Turn white door and overheads off and run just red.
Switch for bed lights under the rail so I can see what I am doing. The cargo lights suck and most LED replacement bulbs screw with the key fob.
Switch for reverse light pods, Hooking up trailers at night is tough even with the camera at times. backing a boat trailer down a dark ramp is also tough with the current lights.
The rock lights might turn into an aux port in the bed somewhere. I don't do rock crawling and may want to plug in power in the bed.

I do a lot of night hunting/hog management on a farm. My goal is to keep the lights as hidden as possible yet still effective.