Need Help! - 2021 Ram 1500 BigHorn method 305nv rims

[tcutting]

Ok so i ordered the above noted rims from customoffsets and am having a butt load of issues. mostly as I am sure you guys are aware, with the front end calipers specifically. I have the 18s with positive 18mm offset matching OEM rim spec. Obviously they dont fit even with 1.5" spacers.

I have seen where people have the 305s on their ram 1500s and am wondering how on earth they are fitting them onto their trucks. Please help!

 

[Accessory.Parts]

I've sold several sets of 305's to people but always with the -12 offset on 18's and -18 offset on 20's. I don't think I've ever seen a 305nv in an 18" with a positive offset. Do you happen to have the part number you ordered?

 

[tcutting]

Ill get you the part number.

I was able to make it work with 1/2 spacers (they were cheaper spacers for a test) I have bora 1/2" hub centric ones coming. hub is set up for the truck and the outter hub is setup for the rims.

 

[tcutting]

I dont have a part number. Below is the best I can provide you with. I was struggling because the -12 offset is not the look i wanted. that pushes it out more than a full inch and I really didnt want the tires outside the fenders.

 

[tcutting]

Before


After

 

[tcutting]

so fun update... the bora hub centric ones did not account for the hub cap center piece. So those nice new spacers didn't fit as a result. They would fit if I wasnt using the center cap, but since that is key to the look of the rims I am, and they didnt account for the thin space those consume and therefore they do not slip over the hub centeric part on the spacer....