Need a wire hot when headlights flashing

[GermanLimited]

Hi,

In Germany we need a rear fog light.
It is only allowed to be turned in, when the headlights are on. Not the DRL.
In need a wire what is hot, wenn Low or high beams are on. Andy sugestions?

Kind regards from Germany

 

[GermanLimited]

I need to correct.
I search a Wire that is hot when fog Lights on

 

[kapinallinen2]

I need to correct.
I search a Wire that is hot when fog Lights on

This is for my 2019 Rebel. Hope it helps.

 

[GermanLimited]

Thanks. That helps a lot. Im interessted in the rear fog Lights. Where can i found the Connector?
Rear fog light is what i need

 

[GermanLimited]

Thanks. That helps a lot. Im interessted in the rear fog Lights. Where can i found the Connector?
Rear fog light is what i beed

 

[kapinallinen2]

Should be it, not sure why the number does not correspond.

 

[GermanLimited]

I found the Connector with a ton of pins.
When i reassambled the truck, i will try to enable rear fog light with alfaobd an do a measurement.
Where can I find a list of the wire colours?
It must be Pin 4 of the connector, right? What colour means WH/OG?

Thanks a lot

 

[kapinallinen2]

I found the Connector with a ton of pins.
When i reassambled the truck, i will try to enable rear fog light with alfaobd an do a measurement.
Where can I find a list of the wire colours?
It must be Pin 4 of the connector, right? What colour means WH/OG?

Thanks a lot

WH/OG stands for White/Orange.
WH/DG is White/Dark green.

 

[Jimmy07]

I found the Connector with a ton of pins.
When i reassambled the truck, i will try to enable rear fog light with alfaobd an do a measurement.
Where can I find a list of the wire colours?
It must be Pin 4 of the connector, right? What colour means WH/OG?

Thanks a lot

If you use the factory rear fog light wires, they would both have to be enabled with alfaobd, and you can only activate them with the headlamp switch that has the front and rear fog light button.
Alfaobd settings:
CBC config I/O: Connector E Pin 39/Connector F Pin 5: Rear Fog Lamps Output Present- Yes

CBC config I/O usage: Connector F Pin 5: Fog Lamp Rear Left/High Beam Shutter- Left Rear Fog Lamp

CBC config I/O usage: Connector E Pin 39: Fog Lamp Rear Right/High Beam Shutter- Right Rear Fog Lamp.

 

[GermanLimited]

I ordered something aftermarket in reference to 68156064AC
The geniue Part would be delivered in 3 Weeks.
I will give it a try...
I hope the warning lamp in the instrument cluster will work also then. If the north american version even have that!?

 

[GermanLimited]

Worked perfect. Thanks a Lot to this Forum!!!
Only the indicator light is Not there.
But i think it is about the Cluster.