Mopar lift going in need help with tire sizes..

[Lungs414]

I have stock 22" black wheels.
What is difference if keep these wheels and go with bigger size tires ? Can I do a 33/12.5/22 without rubbing?
OR
Do I go with new wheels in a 20 and 305/55 20?
Was thinking of 20 x 9 +1 offset.
Also I saw a set of wheels I like in 20 x 10 -18

Will they fit?

 

[DeDax]

I have contemplating a similar conundrum. Originally I thought long & hard about 20 x 9 +1 offset wheels w/ either 33x11.50 or 35x11.50, but the more I think about it, the more I am contemplating going down to 18's. Doing an 18x9 + 1 or 0 offset and will allow for 295/70 which I really think might be the best tire size IMO for our trucks. I really like the wheel offerings in the 18" size too, much more of an off-road emphasis rather than street/bling.

 

[TH3JUICEMAN]

I’m running 22x10 -18 offset with 285/55/22 (34.6x11.7) ridge grapplers. I have the Mopar kit plus added a 1/2” top hat spacer on the front. Had some minor rubbing that is easily fixed in 30 minutes.

 

[SzymiRam@2019]

I’m running 22x10 -18 offset with 285/55/22 (34.6x11.7) ridge grapplers. I have the Mopar kit plus added a 1/2” top hat spacer on the front. Had some minor rubbing that is easily fixed in 30 minutes.

Any pics of the setup ?

 

[Lungs414]

I’m running 22x10 -18 offset with 285/55/22 (34.6x11.7) ridge grapplers. I have the Mopar kit plus added a 1/2” top hat spacer on the front. Had some minor rubbing that is easily fixed in 30 minutes.
[
I am doing just the stock mopar lift, since I have an extended warranty and don't want to jeopardize it. Do you think Toyo AT3 305/55/20 would be a problem on 20 x 10 -18. Custom offset has the tire sized at 33.2 x 12. I don't want to have a big problem, heating and cooling bending the wheel wells to clear would be fine for me.

 

[TH3JUICEMAN]

Any pics of the setup ?

 

[TH3JUICEMAN]

With that size tire you should be fine. There is a sticky at the top of this section that is a “how to” for trimming molding. It’s why I did and have zero rub

 

[Lungs414]

Great. Are your wheels the moto 992 ? That's what I was looking at along with the fuel blitz in the smaller size. If you don't mind me asking which vendor and I was quoted on custom offsets of $1008 for moto and $1300 for the fuels.

 

[TH3JUICEMAN]

Great. Are your wheels the moto 992 ? That's what I was looking at along with the fuel blitz in the smaller size. If you don't mind me asking which vendor and I was quoted on custom offsets of $1008 for moto and $1300 for the fuels.

yeah they are the 992’s. Got them from Custom Offsets, and think I paid $1008 for the wheels and also had them price match the tires. Total for wheel/tires was $2500, and another benefit was they didn’t charge me sales tax. Probably differs state to state though.

 

[Lungs414]

looks really good