Damion
Well-Known Member
- Joined
- Jul 23, 2019
- Messages
- 227
- Reaction score
- 156
- Points
- 43
- Age
- 43
Was a bit bored today and decided to see if I could design and print some bed hole covers for the truck. ( besides its been a bit since I've had the 3d printer up and running ) Im printing the first test now and have a slightly modified one to print after. Ill see which one works out best ( if either do at all ). I can print like no tomorrow ( usually grab files off Thingiverse etc ) but am trying to learn and teach myself the design aspect. ( Using Fusion 360 )
Ill post up pics once I figure out which one works best and if there's interest I can send the .STL file to anyone who wants it so they can make their own.
Im only using black PLA as that's what I have on hand, but if they work good ill redo them in PTEG when I get some.
Heres a link to the file, if you use it give me a like
www.thingiverse.com
Ill post up pics once I figure out which one works best and if there's interest I can send the .STL file to anyone who wants it so they can make their own.
Im only using black PLA as that's what I have on hand, but if they work good ill redo them in PTEG when I get some.
Heres a link to the file, if you use it give me a like
2019 Ram DT Bed Hole Cap by Damion1
Bed Hole Caps that will fill the 2 holes on the top of the bed rails of a 2019-2020 Ram 1500 DT ( New Body Style)Print with the top down, I used the " Fine " setting in Cura.These will friction fit into the holes and are not side specific, Just make 2 of them and you'll be set.
www.thingiverse.com
Last edited:
