5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
LT295/55R20 Nitto Trail Grapplers on Stock Bighorn with 20x9 wheels (WRK)
- Thread starter Lateralus
- Start date
I was thinking about going with that exact tire and size. I have a RC level on my truck. Any issues with rubbing or clearance issues with stock UC arms?
Lateralus
Active Member
- Joined
- Nov 25, 2018
- Messages
- 86
- Reaction score
- 74
- Points
- 18
- Age
- 51
No issues with them. My speedo is only off by 1 MPH at 73 MPH, so I'm happy with that too. It feels like it handles a bit better too.
Awsome. Are you running a leveling kit on yours, what's the height if so?
Lateralus
Active Member
- Joined
- Nov 25, 2018
- Messages
- 86
- Reaction score
- 74
- Points
- 18
- Age
- 51
The truck is stock right now. I'm going to go with the 2" Mopar kit here in the near future.
green68mustang_2002
Well-Known Member
- Joined
- Oct 26, 2019
- Messages
- 216
- Reaction score
- 121
- Points
- 43
- Age
- 41
i run a 33x11.50 on stock 20”s on stock non-air suspension with no rub anywhere. 296/55/20 is 32.8”x11.6”.
Stack
Active Member
- Joined
- Dec 9, 2019
- Messages
- 26
- Reaction score
- 13
- Points
- 3
- Age
- 54
So what is that... 285/60/20? Is that the max I can run without rub? Even at full turn while stuffing the tire?
