5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

Lowering Springs Questions

Granite2WD

Well-Known Member
Joined
Dec 8, 2019
Messages
218
Reaction score
146
Is an alignment needed after installing 2" rear lowering springs?

Are there any options other than Maxtrac?

Thank you!
 

clazer

Well-Known Member
Joined
Feb 21, 2019
Messages
258
Reaction score
165
These trucks have solid rear axles, so I wouldn’t think there would be anything to align. Maybe someone else knows better though
 

Raydar

Active Member
Joined
Jun 10, 2019
Messages
196
Reaction score
96
Location
Carrollton, GA
I did not align mine, afterwards. Several thousand miles later, it still handles fine with no odd tire wear.
In theory, it might tend to cause a bit higher (measured) caster reading, and cause a tiny increase in steering effort. In reality, it doesn't really make a difference.
 

Users who are viewing this thread

Top