Looking to screw bass knob on the front lower dash panel, any risk? (knee panel under steering wheel)

[2wheelsonly]

I see a small square vent, not sure if any electronics are embedded in it...

It's a perfect place to install a bass knob, style of plastic makes adhesion difficult with double sided tape so I will be using screws.

 

[Darksteel165]

Picture?

 

[6of36]

I see a small square vent, not sure if any electronics are embedded in it...

It's a perfect place to install a bass knob, style of plastic makes adhesion difficult with double sided tape so I will be using screws.

You don't say anything about your truck. If it's a 23 they have knee bolster airbags. Don't put anything there.

 

[MannyN]

I see a small square vent, not sure if any electronics are embedded in it...

It's a perfect place to install a bass knob, style of plastic makes adhesion difficult with double sided tape so I will be using screws.

Behind the square vent is your in-cabin temperature sensor. I mounted my Bass Knob in the center console.

 

[kapinallinen2]

And a circulating fan for it.

 

[cliffsta]

Use Velcro with adhesive backs. No drilling

 

[davidajpritchard]

Behind the square vent is your in-cabin temperature sensor. I mounted my Bass Knob in the center console.

View attachment 151927

Mine has a wireless charger in that spot

Sent from my SM-S908W using Tapatalk

 

[6of36]

Use Velcro with adhesive backs. No drilling

You really don't want to have anything mounted there in any way if it's a 23. Airbag will send things flying.