5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Looking to Level my 21 ram bighorn

poole24

New Member
Joined
Jan 12, 2022
Messages
4
Reaction score
0
Trying to figure out a level option for my ram. Torn on which kit to get and how high to go. 2” in front or a 3” in front or 2” in back. Also want to run at least 33x12.50x20s. Will they run on my stock black night edition rims or will I need an aftermarket rim with offset like a -12 offset or so?
 

poole24

New Member
Joined
Jan 12, 2022
Messages
4
Reaction score
0
^^^ 2021 ram 1500 bighorn lone star night edition.
 

BowersFJ

Ram Guru
Joined
Oct 8, 2020
Messages
707
Reaction score
575
How much rake does it have now ? 12.50’s will be close to the UCA’s on stock wheels, but some get away with it …. Something with zero offset is typically the min …. The kit will depend on how much rake ya want after the level …. A 2”F will clear 305/55R20’s


Sent from my iPhone using Tapatalk
 

poole24

New Member
Joined
Jan 12, 2022
Messages
4
Reaction score
0
How much rake does it have now ? 12.50’s will be close to the UCA’s on stock wheels, but some get away with it …. Something with zero offset is typically the min …. The kit will depend on how much rake ya want after the level …. A 2”F will clear 305/55R20’s


Sent from my iPhone using Tapatalk
I’m a little over 2” now. I think 2” would put me around where I want to be but I’ve seen some guys on here talk about a 3” in the front and 2” in the rear. I plan on trying to get some offset wheels eventually but at the moment trying to ditch those awful stock Bridgestones. Can’t hold that thing in the road in a downpour!
 

BowersFJ

Ram Guru
Joined
Oct 8, 2020
Messages
707
Reaction score
575
Yup …. I’m doin 3.3”F and 2”R …. I have 2-1/2” rake right now …. Once you lift, you could do 285/60R20 easy on stock wheels


Sent from my iPhone using Tapatalk
 

Users who are viewing this thread

Top