MaineRam14
New Member
- Joined
- Jul 23, 2024
- Messages
- 3
- Reaction score
- 1
I am looking for a little advice before I pull the trigger on a lift/level and tires. I have a 2019 Ram 1500 Laramie long bed with standard suspension. Currently the truck sits with a 1 3/4" rake from back to front (I have a heavy tonneau cover and bed liner that squats the suspension slightly). I do not aggressively off road and the lift is mainly just for appearance. I am planning on installing the following:
-Bilstein 5100's set to approximately 2.6" level for the front
-Bilstein 5100's set to approximately 2.6" level for the rear
-Upper control arms
-Utilize 20" OEM rims
-Tires will be Falken Wildpeak AT3W 285/65R20 that measure 34.6" tall and 11.4" wide
Here are my questions:
-Does anyone foresee any issues for tire fitment or anything else with this set-up?
-Any recommendations for an inexpensive UCA?
Thanks in advance for any of your help and I would appreciate any pictures of your set-ups if they are on 20" OEM rims.
-Bilstein 5100's set to approximately 2.6" level for the front
-Bilstein 5100's set to approximately 2.6" level for the rear
-Upper control arms
-Utilize 20" OEM rims
-Tires will be Falken Wildpeak AT3W 285/65R20 that measure 34.6" tall and 11.4" wide
Here are my questions:
-Does anyone foresee any issues for tire fitment or anything else with this set-up?
-Any recommendations for an inexpensive UCA?
Thanks in advance for any of your help and I would appreciate any pictures of your set-ups if they are on 20" OEM rims.