Leveling

[KBJ-Woodworks]

I'm going to get a 2" Level on my RAM tomorrow. This is the "before". I won't get tires and wheels until the current tires need replacing.

 

[Woody284]

Tell us some more about your truck. make/model/package etc. Also what kit or level are you installing and before and after measurements if you can. Truck looks great!!

 

[KBJ-Woodworks]

I'm having the ReadyLift 2" leveling kit installed, meaning not raised in the rear. I failed to take 'before' measurements, but I can give you 'after' measurements once I get my truck back. I got the truck used last year. It is a 2020 Laramie with everything but air supports, so it doesn't go up and down. It had deployable running boards, multifunction tailgate, (the two things that sold my wife) adaptive cruise control (which I wanted). It has the 5.7 eTorque engine with 3.92 rear end. 4 wheel drive with locking rear axle. I didn't like the 22" wheels with low profile tires. When they get replaced, I'll have 20" wheels with 34.5" tires. My biggest disappointment is that it won't make me coffee in the morning.

 

[H2OMAN]

I'm going to get a 2" Level on my RAM tomorrow. This is the "before". I won't get tires and wheels until the current tires need replacing.View attachment 208032

Great color.

 

[scottmoyer]

Is the 2" ReadyLift using spacer pucks or spring seat relocators? If it's the front spacer pucks, expect that you'll have front end issues after a while.

 

[boogielander]

Is the 2" ReadyLift using spacer pucks or spring seat relocators? If it's the front spacer pucks, expect that you'll have front end issues after a while.

pucks.
those are always pucks.

 

[KBJ-Woodworks]

This is the 'after' shot. There's not a whole lot of difference, but there is a little more room in that front wheel well so I can get 34.5" tires. Also the 'after' measurement from the edge of wheel well to ground is 37-3/4". The back is just slightly taller.
At this point, really looking forward to wheels and tires; but I still have a lot of tread on these tires.

 

[Skearns]

Nice looking truck. I’m curious if you’ll have any change in mpg.

 

[theblet]

You’ll need an alignment as well. I did motofab top hat spacers. Everything worked out well