LED DRL install

[SilverNight2020]

Hey all, I purchased some aftermarket universal fit LED DRLs that simply have a power and ground wire. I have done some extensive searching and watched a few videos on how to install LEDs but I am still having some issues. Please allow me to elaborate. I cannot find a good fuse or relay to tap in to in the under the hood fuse box and I don't really want to run wires all the way to the cab through the firewall. I am not trying to connect these to a switch, I simply want them to be light up when the vehicle turns on and go off when the vehicle shuts off. I am looking for suggestions on the best fuse or relay to use to allow this to happen. These will be mounted in the grill or the bump in those popout spots near the fog lights. Thanks for the feedback.
Here is the link to the lights I purchased if it helps.

6000K Cool White 6-LED Universal Fit LED Daytime Running Lights For Car

iJDMTOY (2) 6000K Cool White 6-LED Universal Fit LED Daytime Running Lights For Car

store.ijdmtoy.com

 

[Stony0604]

Fuse Tap F60 See post #78 on this... https://5thgenrams.com/community/threads/headlight-assembly.16657/page-4

 

[SilverNight2020]

Fuse Tap F60 See post #78 on this... https://5thgenrams.com/community/threads/headlight-assembly.16657/page-4

Followed the thread all the way down to the picture of your truck. That truck and those headlights look really sharp. Thanks for the info on the fuse.

 

[Stony0604]

Followed the thread all the way down to the picture of your truck. That truck and those headlights look really sharp. Thanks for the info on the fuse.

No problem, and thank you!