5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Just ordered new tires,wheels and lift

Hireman

Member
Joined
Nov 25, 2018
Messages
22
Reaction score
31
Points
13
Age
62
Looking for opinions on possible issues. About to install readylift 3.5 sst lift. Also ordered 20x10 -20mm offset. Plan on 35x 12.50x20 wildpeaks... anyone done similar setup? Any known issues?
Thanks in advance guys!
 
just did the lift, like how it looks but I don't plan on doing 35s, 33s probably, I think 35 would be close to rubbing
 
Looking for opinions on possible issues. About to install readylift 3.5 sst lift. Also ordered 20x10 -20mm offset. Plan on 35x 12.50x20 wildpeaks... anyone done similar setup? Any known issues?
Thanks in advance guys!
I believe that with the Mopar 2" lift you can clear 35s so I think you will be fine with no rubbing. Post some pics when done
 
It all depends on the offset. Mopar lift claims 35s, but doesnt specify width. Some people have had rubbing, some haven't. All depends on the offset of the wheel and the tire.
 
It all depends on the offset. Mopar lift claims 35s, but doesnt specify width. Some people have had rubbing, some haven't. All depends on the offset of the wheel and the tire.
Thanks for clarifying my info!
 
Lifts done, ended up going with 295-60-20 wildpeaks. My wheels are -20 and I'm pretty sure 35's would have hit. Dont think I want to do any surgery on a 60k truck. The wildpeak 35's are 34.6 tall...the 295's are 33.9 tall. Main difference in width...wheels will be on friday . Here's pic after lift and the wheels I went with
 

Attachments

  • 20181128_185728.jpg
    20181128_185728.jpg
    3.6 MB · Views: 86
  • d51e699e6e6f488881000e0cc19aa7e0.jpg
    d51e699e6e6f488881000e0cc19aa7e0.jpg
    43.9 KB · Views: 77
Lifts done, ended up going with 295-60-20 wildpeaks. My wheels are -20 and I'm pretty sure 35's would have hit. Dont think I want to do any surgery on a 60k truck. The wildpeak 35's are 34.6 tall...the 295's are 33.9 tall. Main difference in width...wheels will be on friday . Here's pic after lift and the wheels I went with
Nice! I have a 3 1/2” RC lift with 35x12.5’s on “0” offset wheels and I did have to do some ‘surgery’. Trimmed some of the plastic on the bottom rear of the front fender wells.
 
Lifts done, ended up going with 295-60-20 wildpeaks. My wheels are -20 and I'm pretty sure 35's would have hit. Dont think I want to do any surgery on a 60k truck. The wildpeak 35's are 34.6 tall...the 295's are 33.9 tall. Main difference in width...wheels will be on friday . Here's pic after lift and the wheels I went with
Like those rims. Looking forward to seeing pics.
 
Like those rims. Looking forward to seeing pics.
Did test fit and ceramic coating on wheels today. Will have them on tomorrow
 

Attachments

  • 20181129_140253.jpg
    20181129_140253.jpg
    3.7 MB · Views: 26
Looks nice! Might want a bit larger tire:p:LOL:. Seriously though, think it will look great
 
Looks nice! Might want a bit larger tire:p:LOL:. Seriously though, think it will look great
Guys at the tire place said 35-12.50 would have scrubbed
 

Attachments

  • 20181130_180548_resized.jpg
    20181130_180548_resized.jpg
    648.5 KB · Views: 58
Lifts done, ended up going with 295-60-20 wildpeaks. My wheels are -20 and I'm pretty sure 35's would have hit. Dont think I want to do any surgery on a 60k truck. The wildpeak 35's are 34.6 tall...the 295's are 33.9 tall. Main difference in width...wheels will be on friday . Here's pic after lift and the wheels I went with

After adding the Ready Lift - was the truck level or is there still a small rake from back to front?
 
Looks great. I like the wheels, I haven’t seen them before.
I haven't either, took me a while to find something "new" .. black or chrome or a mix of the 2 are everywhere..I wanted something that I wouldnt see on another truck going down the road.
 

Users who are viewing this thread

Back
Top