5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Installed revel links,daystar spacers,hellwig sway bar and new tires.

Craigg69

Active Member
Joined
Feb 18, 2019
Messages
44
Reaction score
64
Points
18
Age
56
Location
Cape Cod, Mass
Finally got a round to install some new mods on my Truck. Revel links with daystrar spacers to level front. New Nitto ridge grapplers 285/55R22 and the hellwig rear sway bar. I still had to wire tire a piece of the inner fender back as it would rub on full lock in reverse. I attached a couple pics of entry mod, OR1 and where I had to wire tie. Took about 4 hours to get all done.20201117_091754 (2).jpg20201117_091903 (2).jpg20201117_091945.jpg20201117_092015.jpg20201117_092031.jpg20201117_091700.jpg
 
Finally got a round to install some new mods on my Truck. Revel links with daystrar spacers to level front. New Nitto ridge grapplers 285/55R22 and the hellwig rear sway bar. I still had to wire tire a piece of the inner fender back as it would rub on full lock in reverse. I attached a couple pics of entry mod, OR1 and where I had to wire tie. Took about 4 hours to get all done.View attachment 74415View attachment 74416View attachment 74417View attachment 74418View attachment 74419View attachment 74420
Love it!!! The sway bar upgrade is well worth it and makes it feel more stable? I’m kinda stuck on deciding between the 33x12.50x22 or the 285/55/22 like you did..
 
Love it!!! The sway bar upgrade is well worth it and makes it feel more stable? I’m kinda stuck on deciding between the 33x12.50x22 or the 285/55/22 like you did..
I thought about a couple tires that were 12-12.5 wide and had concerns if it was going to rub being that wide. The tires I got were 34.6H and 11.6W
 

Users who are viewing this thread

Back
Top