5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

How to: Hook up light bar to highbeams

Dukem258

New Member
Joined
Apr 9, 2021
Messages
1
Reaction score
2
So you got everything set up and installed and have no idea how to control it using your highbeam switch. This guide shows how I have it installed on my '21 rebel.

Got it installed on my front license plate mount. I live in Alberta, Canada so i'm not required to have a plate for the front.
20210416_000536.jpg

Where I put the on/off switch.
20210416_000557.jpg

How I got the wire through the firewall of the truck.

20210416_000621.jpg

The headlight connector is just one plug with a bunch of wires coming out of it like so. I'm using the driver side headlight plug in this case as it's closer to the switch relay and battery.

20210416_000735.jpg

Long story short; get yourself a splice connector and splice it into the large white wire with green stripe onto it (There is a large and a small white wire with green stripe.) Make sure that when using the splice connector that you install it properly to get a solid connection or you may have to do it again.

20210416_000834-jpg.90171


If done so properly you can now use the highbeam switch stalk to turn on the lightbar and highbeam at the same time.
 

Attachments

  • 20210416_000834.jpg
    20210416_000834.jpg
    106.4 KB · Views: 120

585nik585

Member
Joined
Nov 11, 2020
Messages
12
Reaction score
8
made the connection in the same way. while I installed a 280W 2-row beam. I am waiting for the receipt of 320 W 2-row. Behind the radiator grill. connected to the high beam through a relay and a fuse.
 

Attachments

  • led1.jpg
    led1.jpg
    145.9 KB · Views: 24
  • led2.jpg
    led2.jpg
    129 KB · Views: 22
  • led3.jpg
    led3.jpg
    154.5 KB · Views: 19
  • led4.jpg
    led4.jpg
    133.8 KB · Views: 21
  • led5.jpg
    led5.jpg
    153.2 KB · Views: 21
  • led6.jpg
    led6.jpg
    156.1 KB · Views: 23

Users who are viewing this thread

Top