Help with offset on XX snare wheels 20 inch

[Chopperbobby]

Looking at this rim for my 2020 ram 1500. It comes with I believe +18 off set. I believe this will keep it close to my 20 inch Crome wheels? It also come in the 0mm. I know this will kick out the wheel a little. Just wondering how much. I would like to kick out a little but stay with in the wheel well. Any advice on the back spacing esp if th 0 mm will be in wheel well

 

[LaxDfns15]

I believe your current wheels are +19, so if you go with a 0mm offset it'd push them out 19mm or basically .75". Go stand next to your wheel, look straight down from the fender, and stick a tape measure on your tire sidewall. If you can see .75" you're going to see sidewall outside the wheel well. If you get wider tires they're just going to stick out that much farther.

Also, make sure you don't buy 6x120 as our trucks are 6x139.7.

 

[Chopperbobby]

I believe your current wheels are +19, so if you go with a 0mm offset it'd push them out 19mm or basically .75". Go stand next to your wheel, look straight down from the fender, and stick a tape measure on your tire sidewall. If you can see .75" you're going to see sidewall outside the wheel well. If you get wider tires they're just going to stick out that much farther.

Also, make sure you don't buy 6x120 as our trucks are 6x139.7.

Thanks. I will measure tomorrow.

 

[Chopperbobby]

The add says 6 x 120 and 6 x 139.7. So I guess it is drilled to fit both?