5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HELP! OEM LED headlight conversion troubles

Miguel

Active Member
Joined
Aug 23, 2019
Messages
36
Reaction score
32
Location
Cincinnati, OH
Help, I did the OEM LED headlight conversion on my 2019 Ram 1500 Big horn and with the retro shop wiring harness and the lights work great but after I finish the conversion, when I try to start my truck it flags a slew of warnings and caution messages (see pictures) and it won't start and I can't figure out what I did wrong, I tried disconnecting the battery for 30 minutes (twice) all the fuses are good and any ideas?
 

Attachments

  • 0914191623e.jpg
    0914191623e.jpg
    115 KB · Views: 106
  • 0914191623c.jpg
    0914191623c.jpg
    114.7 KB · Views: 105
  • 0914191623b.jpg
    0914191623b.jpg
    124.5 KB · Views: 104
  • 0914191623a.jpg
    0914191623a.jpg
    119.5 KB · Views: 100
  • 0914191623.jpg
    0914191623.jpg
    121.1 KB · Views: 105
  • 1568493302624300433207087705129.jpg
    1568493302624300433207087705129.jpg
    190.6 KB · Views: 104

KRField

Well-Known Member
Joined
Oct 17, 2018
Messages
364
Reaction score
276
Location
Tri-Cities, TN
Let it sit couple hours or over night after hooking back up and see if it goes away. Mine did that when I unhooked everything a few months ago. I freaked. Left everything hooked up went to bed and by morning everything was back to normal.


Sent from my iPhone using Tapatalk
 

canative

Active Member
Joined
Feb 16, 2019
Messages
121
Reaction score
66
Not to highjack your thread but, mine through out almost the same warnings a couple weeks ago. I thought it might be the Pulsar causing it. I removed it and the engine light was still on. Took it to the dealer and it was a small evap. leak near the fuel filler neck. They fixed it and I got it back home and installed the Pulsar again on Monday and low and behold today I got all those warnings again! They turned off but the engine light stayed on again! I guess I'll remove the Pulsar unit again and take it back to the dealer. I hope its not the Pulsar.
 

TheMadDutchDude

Well-Known Member
Joined
Mar 1, 2019
Messages
268
Reaction score
117
Sounds like you didn’t install the fuse back into the new lead. I made the same mistake. It seems like the truck is “on” but there’s no ignition. You HAVE to use both fuses.
 

Users who are viewing this thread

Top