Help! Looking for running boards

[Zmoney]

Looking on some advise on what would be a good look/functioning running board for my ram. I’m considering the go rhino RB20, but does anyone else out there have good ideas on what would look good? Thanks!!

 

[Nj921]

Spent countless hours trying to find something close to the OEM steps without spending 700$. Finally came across Westin R5 on amazon and love them. Paid 350 for the black, but they have chrome as well. I did run into an issue with one of the brackets being wrong, but was still able to get them installed while i wait for amazon to send me another set (it’s just one of the 3 nuts on the rocker that doesn’t line up). Very happy with the look, and they are way more sturdy than the mopar steps i had on my 2017 ram.

 

[Bwarren2]

Your decision should be based on future mods, are you going to stay chrome or go black. I am looking at these

https://www.carid.com/tyger/star-armor-black-side-steps.html

 

[66cuda]

I've been waiting for the black ones from Mopar, 82215301AC, to be available at the dealer. Dealer says their system is showing it won't available till February, 2019. I'm seriously considering aftermarket now.

 

[Zmoney]

Your decision should be based on future mods, are you going to stay chrome or go black. I am looking at these

https://www.carid.com/tyger/star-armor-black-side-steps.html[/QUOTE

Good point. I don’t plan on chrome delete right now. Just tint out windows and getting a Lomax cover. Would like to get new wheels like fuel warrior

 

[MWLRam]

Anyone have info, or know where to find info, as to how much width running boards add to the trucks overall width? I realize there are different width boards, mounting offsets, etc.

I'm trying to determine if there are any boards that will work for my situation. I only have about 4" on each side of the truck (with mirrors folded in) to clear garage entrance. Would like nice usable running boards but don't want to catch them and damage the house and truck.

Any info appreciated!

 

[Mikey1641]

Anyone have info, or know where to find info, as to how much width running boards add to the trucks overall width? I realize there are different width boards, mounting offsets, etc.

I'm trying to determine if there are any boards that will work for my situation. I only have about 4" on each side of the truck (with mirrors folded in) to clear garage entrance. Would like nice usable running boards but don't want to catch them and damage the house and truck.

Any info appreciated!

Amp research power running boards. Problem solved


Sent from my iPhone using Tapatalk

 

[2019REBEL]

Anyone have info, or know where to find info, as to how much width running boards add to the trucks overall width? I realize there are different width boards, mounting offsets, etc.

I'm trying to determine if there are any boards that will work for my situation. I only have about 4" on each side of the truck (with mirrors folded in) to clear garage entrance. Would like nice usable running boards but don't want to catch them and damage the house and truck.

Any info appreciated!

Try the GoRhino RB20's.

 

[MWLRam]

Amp research power running boards. Problem solved


Sent from my iPhone using Tapatalk

I would love that but unfortunately power running boards are out of reach for our budget.

 

[MWLRam]

Try the GoRhino RB20's.

View attachment 14833View attachment 14834

Those look nice! Per your picture they don't look like they extend past the tire width. Am I right?

 

[2019REBEL]

Those look nice! Per your picture they don't look like they extend past the tire width. Am I right?

Just a bit maybe 1/2 to 3/4 inches.

 

[MWLRam]

Just a bit maybe 1/2 to 3/4 inches.

Thank you!!

 

[Marcus889]

Looking on some advise on what would be a good look/functioning running board for my ram. I’m considering the go rhino RB20, but does anyone else out there have good ideas on what would look good? Thanks!!

I went with Rough Country Nerf Bars. But it's as someone else said it depends on the mods you are planning to do.

 

[Saints]

I went with Rough Country Nerf Bars. But it's as someone else said it depends on the mods you are planning to do.

How much did those run you? I was looking at some n-fabs today that were similar that were $599

 

[Marcus889]

How much did those run you? I was looking at some n-fabs today that were similar that were $599

$399 shipped. https://www.roughcountry.com/steps-...cle_make=8&vehicle_model=263&vehicle_year=336

 

[RAMREB]

Try the GoRhino RB20's.

Would you happen to have a picture of these with the truck clean? I see you live in Ontario so I know I am asking a lot for this time of year Lol. I have the same two tone color combo Rebel and am highly considering these.

 

[EJanx07]

I installed these on my Lone Star last weekend.

 

[2019REBEL]

Would you happen to have a picture of these with the truck clean? I see you live in Ontario so I know I am asking a lot for this time of year Lol. I have the same two tone color combo Rebel and am highly considering these.

Suppose to be nice maybe I can get it washed this week and I will get some clean pics.

 

[2019REBEL]

Here you go @RAMREB . Still not completely clean but the best I can do for now.

 

[RAMREB]

Here you go @RAMREB . Still not completely clean but the best I can do for now.

Awesome, Thank you I am sold!