FreakyFrankz
New Member
- Joined
- Jul 22, 2021
- Messages
- 1
- Reaction score
- 1
- Points
- 3
- Age
- 57
Same here. Looking for the place to tap the DRLs and Blinkers...
Last edited:
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Front turn signal wire colors
- Thread starter byoder36
- Start date
Darks907Ak
New Member
- Joined
- Sep 16, 2025
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 37
Has anyone figured this out? Is it worth even testing? I have the strip, but it sounds like it’s not feasible to accomplish without causing issues…
Bansheeman6100
Active Member
- Joined
- Apr 15, 2022
- Messages
- 59
- Reaction score
- 30
- Points
- 18
- Age
- 35
Here's an update from myself, but also needing some help! I have been following this thread, as i was planning on installing a set of fog lights that also have a turn signal, as my new bumper almost completely blocks my headlight turnsignal
My truck is a 2020 1500, Bighorn base, with Vland aftermarket lights. I used the diagram posted about for the wht/tan and wht/grn at the headlight harness, and that was it. it worked lastnight perfectly after install, and then this morning I got a "front marker lights out" warning, and then even the factory headlight signal wasn't activating. After driving awhile, everything started working again, and then it stopped again
Im assuming that it's a signal issue, and am guessing i need to throw a resistor in somewhere, or maybe change a setting in AlfaOBD?
My truck is a 2020 1500, Bighorn base, with Vland aftermarket lights. I used the diagram posted about for the wht/tan and wht/grn at the headlight harness, and that was it. it worked lastnight perfectly after install, and then this morning I got a "front marker lights out" warning, and then even the factory headlight signal wasn't activating. After driving awhile, everything started working again, and then it stopped again
Im assuming that it's a signal issue, and am guessing i need to throw a resistor in somewhere, or maybe change a setting in AlfaOBD?
