5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Front turn signal wire colors
- Thread starter byoder36
- Start date
skyhawk42
Well-Known Member
- Joined
- Mar 7, 2022
- Messages
- 276
- Reaction score
- 232
| Turn Signal (Left) | White/Green (LF); White/Dk. Green (LR) | + | BCM above driver kick, white 24 pin plug (D), pin 14 (LF); black 48 pin plug (E), pin 3 (LR) |
| Turn Signal (Right) | White/Tan (RF); White/Yellow (RR) | + | BCM above driver kick, black 24 pin plug (A), pin 13 (RF); white 48 pin plug (F), pin 42 (RR) |
Thank you! Just what I was looking for
E.Hands
Well-Known Member
Skyhawk42,
Can you please tell me where to tap into the white led lights under the door mirrors that fade on and then off to illuminate when the door is opened at night?
skyhawk42
Well-Known Member
- Joined
- Mar 7, 2022
- Messages
- 276
- Reaction score
- 232
I don’t have that listed in the documents I have, but I think the wire for those lights only goes from the light to the door module inside of the door. Shouldn’t be to hard to trace it.
aziansoutherner
Member
- Joined
- Oct 29, 2023
- Messages
- 16
- Reaction score
- 5
For my truck a 2021 ram 1500 Laramie, both the left and the right signal within the respective taillights were white with yellow stripe. I see this post but also saw another that said white with yellow. Wanted to make sure folks check for your truck. I used the multimeter with to signal on to verify and glad I did.
One_like_God
Member
- Joined
- Dec 4, 2023
- Messages
- 5
- Reaction score
- 1
I'm still following and trying to figure it out too. I started on the led grille lights on my 2021 1500 bighorn. I was able to tap into the fuse box under the hood for the led running lights. I used the fuse for the "trailer cam." But no matter where I try to tap into to get the power for sequential turn signal, it doesn't work. I actually had it working a couple of times while the truck was turned off and in the "run" position. But once I started the truck, they didn't work properly.
But no matter where I try to tap into to get the power for sequential turn signal, it doesn't work. I actually had it working a couple of times while the truck was turned off and in the "run" position. But once I started the truck, they didn't work properly.
I would also need a wiring diagram for this.
I would also need a wiring diagram for this.
Subscribe to alldatadiy and you get your model year specific schematics and description of operations of all the systems.
jeffreymglenn74
New Member
- Joined
- Mar 27, 2024
- Messages
- 2
- Reaction score
- 0
I have a 2022 Ram 1500 classic Warlock I too am trying to install sequential side marker lights with turn signal and I am having the hardest time trying to find where to plug in for this I did it from the tail lights wires but when I tested it it seems like it would work but then when I installed it does I got them working but then when I hit the brakes the side step marker lights would light up too with the brakes being applied I had a loss here I need help can anyone help me with this please thank you and appreciate all of you ram fans I love the truck I love the brand Avid Ram fan.!
jeffreymglenn74
New Member
- Joined
- Mar 27, 2024
- Messages
- 2
- Reaction score
- 0
I have a 2022 Ram 1500 classic Warlock I too am trying to install sequential side marker lights with turn signal and I am having the hardest time trying to find where to plug in for this I did it from the tail lights wires but when I tested it it seems like it would work but then when I installed it does I got them working but then when I hit the brakes the side step marker lights would light up too with the brakes being applied I had a loss here I need help can anyone help me with this please thank you and appreciate all of you ram fans I love the truck I love the brand Avid Ram fan.!
HookedonRam
Active Member
I can't tell anything from that diagram. Has anyone figured out how to tap into the turn signal wires for the grill led lights with the turn signal function to work? TIA
