Front lower air dam removed?

[Mark derix]

Has anyone removed their front valance/air dam? I'm thinking the lower body lines would mesh perfect. Just wondering if anyone has pics of it. Not worried about the wind deflection because I drive only city in it.

 

[jermball623]

Just pulled mine off. Looks 100 times better imo.

 

[Mark derix]

Just pulled mine off. Looks 100 times better imo.

What size tires you run

 

[jermball623]

33x12.5 R20

 

[Nails]

I’ll def be doing this once I need and get bigger tires. IMO it looks great that way

 

[Nukegm426]

So those that have done this.... what did you do with the plug? I’d prefer to not just tie it out of the way. Maybe a mating blank plug for it so that it stays clean?

 

[Mark derix]

So those that have done this.... what did you do with the plug? I’d prefer to not just tie it out of the way. Maybe a mating blank plug for it so that it stays clean?

I only took bolts out didnt remove bracket so all motor and wire stil ther just remove 4 bolts 2 on each side then like 15 on tbe bumber one

 

[Mark derix]

I only took bolts out didnt remove bracket so all motor and wire stil ther just remove 4 bolts 2 on each side then like 15 on tbe bumber one

If you look at the essembly you will see it the plastic only has 4 bolts holding it to the bracket on far left and far right that way everything works lime stock just no plastic piece to deflect air then if you pull non moveing one off bumber just like 14 bolts to pull and two clips

 

[Nukegm426]

If you look at the essembly you will see it the plastic only has 4 bolts holding it to the bracket on far left and far right that way everything works lime stock just no plastic piece to deflect air then if you pull non moveing one off bumber just like 14 bolts to pull and two clips

So basically you left the motor and rod but pulled the rest... I wondered about that. I’m picky about leaving wiring exposed after unplugging things lol

 

[Mark derix]

So basically you left the motor and rod but pulled the rest... I wondered about that. I’m picky about leaving wiring exposed after unplugging things lol

No unplugging just un screw 4 bolts take plastic piece off nothing else. For the electric valance then to remove the non moving bumper one just take 12-14 screws off

 

[CurtisEFlush]

Has anyone removed their front valance/air dam? I'm thinking the lower body lines would mesh perfect. Just wondering if anyone has pics of it. Not worried about the wind deflection because I drive only city in it.

removed mine, no codes. Only thing I need now is a skid plate. But I’m having a very hard time finding one. Seems easy enough, might fabricate my own but man, I thoroughly enjoy the look of it now.