Fox coilivers rubbing?

[SgtSlaughter]

I didn't even think about flipping the arms. When installed them there wasn't anything stating driver vs passenger side to I used the fabtech name plate at the identifying marking.

I'm going to abuse it this weekend a bit and go in for a realignment on Monday to see if they can bring it closer to spec. I might try another shop too.

Otherwise it looks like I'm either swapping right and left or saving for a different set of arms.

 

[CHeYeNNe71]

A quick search on Mevotech and Both arms have different part#, so guessing you have them opposite of what supposed to be. Random pic, but idea

 

[SgtSlaughter]

Final update, fabtech didn't have the arms labeled correctly. Swapped sides and more I'm at +4.3* caster, shocks don't rub the cv's anymore. Now my 35's rub though haha thank you all for your help

 

[Vulpes]

Final update, fabtech didn't have the arms labeled correctly. Swapped sides and more I'm at +4.3* caster, shocks don't rub the cv's anymore. Now my 35's rub though haha thank you all for your help

WOW! So the UCA's were reversed! I thought it was pretty wild to suggest it. Glad you got a fix, and that caster number is much much better.

What are the 35's rubbing on?

 

[boogielander]

WOW! So the UCA's were reversed! I thought it was pretty wild to suggest it. Glad you got a fix, and that caster number is much much better.

What are the 35's rubbing on?

my money would be on liner if he didn't trim and not running stock wheels
or on uca if he's running stock wheels.

 

[SgtSlaughter]

WOW! So the UCA's were reversed! I thought it was pretty wild to suggest it. Glad you got a fix, and that caster number is much much better.

What are the 35's rubbing on?

Yea I couldn't believe the arms were in backwards and installed just fine aside the rub on the cv's.

It's rubbing on the bottom portion of the fender liners by the door on both sides when I turn.

I already removed the mud flap things it was rubbing on. ill try removing more liner but I already took a good amount off.

 

[boogielander]

Yea I couldn't believe the arms were in backwards and installed just fine aside the rub on the cv's.

It's rubbing on the bottom portion of the fender liners by the door on both sides when I turn.

I already removed the mud flap things it was rubbing on. ill try removing more liner but I already took a good amount off.

just cut them lol
if you go offroad and get off camber/ flex a lot you might also want to trim the pinch weld too.