Footwell LED upgrade - FAIL

[RamFan70]

I recently swapped out the factory footwell bulbs to Lasfit 194 LED T10's and started getting the rear drivers side door ajar light staying on. Doors won't lock, no remote start, and all the other things tied into a door thinking its open. So I concluded the only thing I had done recently was the bulb swap. Sure enough pulled the T10 LEDS and everything back to normal. Is there a specific LED bulb I should be using for this? Any input on what this little bulb could be doing to cause this? If its a canbus error can I modify it through AlfaOBD? Any help and input would be much appreciated.

Cheers!

These are the bulbs I used.......

https://www.amazon.ca/dp/B0821GVXB3?ref=ppx_yo2ov_dt_b_product_details&th=1

 

[kdoublep]

I used lasfit for my footwells. No issues.

 

[kdoublep]

Looks like same bulb.

I did not change anything through Alfa. All my interiors were switched to lasfit except Visors.

What is your truck?

 

[RamFan70]

Looks like same bulb.

I did not change anything through Alfa. All my interiors were switched to lasfit except Visors.

What is your truck?

2022 Ram 1500 Sport "Night Edition" Canadian Model

 

[RamFan70]

Well, I was wrong. The issue is back with the door ajar light staying on.....close rear passenger door and power step stays out and interior lights stay on. Thinking maybe a defective door jamb switch