5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Fender Flares or not?

wacopolumbo

Active Member
Joined
Apr 26, 2022
Messages
167
Reaction score
339
Points
63
Location
Yorktown, Virginia
Been thinking about adding fender flares don’t have any experience with them. I like the idea of reducing dirt kicked up on the sides of the vehicle.

With my slight lift and bigger tires, I think the flares might look cool.

Those of you with them, what brand/style do you reccomend? Painted or unpainted?

Thanks!
 

Attachments

  • IMG_9346.jpeg
    IMG_9346.jpeg
    420.1 KB · Views: 33
Absolutely NOT. That truck looks so clean without them. Flares are lame. Pocket flares are terrible. Mud flaps are the worst.
 
Aftermarket ones usually do more damage where they mount and trap moisture and dirt then they do to add protection.
 
Good feedback so guys. Thanks, keep it coming.

I was considering the OEM Offroad ones 82215284AB (pocket flares). I’m guessing H2OMAN would be a strong “no” to those.

I had also considered the Husky RVLs, but they look like they stick out too far.
 
Here's a few pics for you to compare.....
IMG_1546.jpegIMG_1545.jpegIMG_1547.jpeg
I personally like the look of pocket flares, had them on my 6 Jeeps over the years. Definitely help with the dirt flinging.....

These were "no name brand" , bought off of Temu for $179. I was really surprised how well they fit. Better fit than bushwackers I had in the past.
 
I like the oem flares, looks better than the plain no flare truck.
 

Attachments

  • IMG_0641.jpeg
    IMG_0641.jpeg
    514.3 KB · Views: 27
While I am not a fan of fenders flares, I installed Weather Tech mud flaps on my 2022 Bighorn to reduce to amount of stuff that gets splattered down the side. they fit over the little factory things and work well for me.
 
Looks like you’re going for a TRX look. So if anything, I’d suggest something like these.

I wasn’t thinking of going that wide, but the more I think about it, I figure why not?

With flares that large, I’m guessing wheel spacers are next to bring the wheels out to the flare? Right now, with my larger tires on factory rims, they are flush with the top of the fender.

I’m in uncharted territory for me.
 

Attachments

  • IMG_4558.jpeg
    IMG_4558.jpeg
    245.7 KB · Views: 3
  • IMG_4562.jpeg
    IMG_4562.jpeg
    180.6 KB · Views: 3
Last edited:

Users who are viewing this thread

Back
Top