feedback on your lowering

[CHeYeNNe71]

I installed the IHC 3/5 drop kit on mine. The adjustable upper control arms allowed me to get the alignment within factory specs. The turning radius loss was very noticeable. The ride quality isn't terrible, but is bouncy. I have since swapped rear shocks for QA-1 fully adjustables. Also removed the IHC front components and installed Belltech fully adjustable coilover struts and Maxtrac camber/caster correcting upper control arms. I have 22" wheels from the factory, so the Belltech drop spindles will not work for me unless I want to buy front hubs for 20" or modify the spindles to fit my hubs.

Any chance you have part# for the QA-1? thanks

 

[Rock Crawler]

Any chance you have part# for the QA-1? thanks

Keep in mind that he did a 3/5 drop. If you did a 2/4 drop, the same shocks may not work. Make sure to check with QA1 before ordering.

 

[CHeYeNNe71]

Keep in mind that he did a 3/5 drop. If you did a 2/4 drop, the same shocks may not work. Make sure to check with QA1 before ordering.

Oh yeah for sure. I was just looking for a starting point, but thanks for the heads up!