5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

Exterior Lighting Options

Rusty_Shackleford

New Member
Joined
Jul 9, 2020
Messages
1
Reaction score
1
I’m setting my 2020 Ram 1500 Crew Cab Big Horn Level 1 4x4 truck up to be an over landing vehicle. I’ve done a lot of work, but I want to know if anyone has installed some off-road lighting that isn’t large light bars (KC, HIAA, etc), and how they did that with minimal drilling/rack placement.

thanks in advance for any help:)

Work done includes Leitner ACS Forged Rack, iKamper Skycamp RTT, multiple leitner accessories, Bilstein 6112 & 5160 shocks, Method wheels, and Nitto Ridge Grapplers.
 

Fatherdeath

Active Member
Joined
Jul 19, 2021
Messages
90
Reaction score
97
Location
Arizona
I installed some added back lights, ditch lights, dual cube fog lights, and a 30inch bar in my bumper.. front bumper goes on Monday then i have a 30 inch IR bar that is just magnet held on the hood when i need it for night shoots

all wired to the auxbeam 8 port switch and then that is mounted in the center console area, other then replacing the bumpers there was no body drilling or trimming
 

jellis466

Active Member
Joined
May 23, 2021
Messages
55
Reaction score
23
Location
Missouri
I installed some added back lights, ditch lights, dual cube fog lights, and a 30inch bar in my bumper.. front bumper goes on Monday then i have a 30 inch IR bar that is just magnet held on the hood when i need it for night shoots

all wired to the auxbeam 8 port switch and then that is mounted in the center console area, other then replacing the bumpers there was no body drilling or trimming
Magnet held on? what type of magnets are you using for this?
 

Nick57

Active Member
Joined
Apr 20, 2021
Messages
86
Reaction score
55
I installed some added back lights, ditch lights, dual cube fog lights, and a 30inch bar in my bumper.. front bumper goes on Monday then i have a 30 inch IR bar that is just magnet held on the hood when i need it for night shoots

all wired to the auxbeam 8 port switch and then that is mounted in the center console area, other then replacing the bumpers there was no body drilling or trimming
Can you post some pictures of your set up? The mounting for the switches, light locals and such. :)
 

2019REBEL

Ram Guru
Joined
Jan 28, 2018
Messages
1,849
Reaction score
907
Location
ON, Canada
I just did a smaller bar in front. No cutting involved.


Post 26
 

Fatherdeath

Active Member
Joined
Jul 19, 2021
Messages
90
Reaction score
97
Location
Arizona

Users who are viewing this thread

Top