5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

eTorque Bearing Replacement, Fixed Grinding Noise

How did you get the pulley off. I've tried pulling it with what seemed like a lot of pressure. I am afraid of breaking it.
I had a 5 ton, 2 arm puller (3 ton with 3 arms couldn't handle it and broke). Rigged a clamp to keep the 2 arms secure and slowly ratched a quarter turn or less at a time. Once there was enough of a gap between the pulley and the housing, I used 2 small wood wedges and tapped (alternating) until it came off. Be careful as everything flew apart.
 

Attachments

  • 20251127_150153.jpg
    20251127_150153.jpg
    171.1 KB · Views: 0
Last edited:

Users who are viewing this thread

Back
Top