Engine Bay Air Compressor Mount?

[wacopolumbo]

I recently replaced my factory air box with the MOPAR Ramair CAI. This left a large space on the passenger side in the engine bay. It was suggested that I could put an air compressor in there. I like that idea but can’t find any mounts on line for the set-up. Does anyone here know how to get a secure set-up for an air compressor where the intake box was and maybe a train horn?

This is the vacated space…

 

[Dougs 2021 Ram]

Ram 5.7 Belt Driven Compressor Kit

1090303

www.littleshopmfg.com

 

[boogielander]

NH Overland makes an engine bay mount for compressors.
However it doesn't go in the space where the airbox was. Check it out though

 

[vincentw56]

NH Overland makes an engine bay mount for compressors.
However it doesn't go in the space where the airbox was. Check it out though

Actually, it does go in the space where the airbox was. At least the new version they have.

4th Gen Ram VARARAM Compressor Mount

PLEASE READ! 09-18 RAM 1500 5.7L 18-22 RAM 1500 CLASSIC 5.7L 10-18 RAM 2500/3500 5.7L Passenger side engine bay compressor mount for 4th Gen Vararam Intake equipped Ram 1500/2500/3500 5.7L trucks. New configuration for ARB Dual Compressor, ARB Single Compressor, Viair 450H. Also mounting...

www.nhoverland.com

 

[wacopolumbo]

Actually, it does go in the space where the airbox was. At least the new version they have.

4th Gen Ram VARARAM Compressor Mount

PLEASE READ! 09-18 RAM 1500 5.7L 18-22 RAM 1500 CLASSIC 5.7L 10-18 RAM 2500/3500 5.7L Passenger side engine bay compressor mount for 4th Gen Vararam Intake equipped Ram 1500/2500/3500 5.7L trucks. New configuration for ARB Dual Compressor, ARB Single Compressor, Viair 450H. Also mounting...

www.nhoverland.com

I got excited about this option until I read that it’s for the classic. I shot them a message to see if they have something for the non-classic. I really want to use that space where the intake box was.

 

[vincentw56]

I got excited about this option until I read that it’s for the classic. I shot them a message to see if they have something for the non-classic. I really want to use that space where the intake box was.

Oh, I missed that. Well, that sucks. I don't think it would be that hard to make something.

 

[crusher]

i too was thinking of putting a air compressor for my 1000hd bags in that exact same spot.

i was thinking of using this kit https://www.airliftcompany.com/shop/25980ez/

Air Lift 25980EZ​

and bolt it/or use small screws in the plastic thats already there

 

[JDHarris]

I removed the plastic air box mount bracket and took that to a local fab shop along with the ARB mounting template. They were able to make a bracket for the dual compressor that used the same mounting holes and bolts in the body of the truck as the stock air box bracket. I no longer have that factory plastic mount in my truck, the compressor mount is in that place now. It was relatively cheap.

The only kit I could find you can buy to mount a compressor in the engine bay is from a TRX. After talking with the owner and exchanging photos and measurements, it seems like it would fit for Rebel trucks, and likely all 5th gen trucks that are using RamAir style intakes. I have not tried it though. You can buy a full kit with brackets, compressor, air tank, etc, or you can buy individual pieces. They mount the compressor above the fuse panel on the drivers side attaching to a heavy duty battery box they make. The compressor air tank ends up where the stock air box was. It seems like a quality piece of kit.

Ultimate Onboard Air System

This is the ultimate onboard air system available for your TRX. Comes complete with the BrawlerFab fabricated battery box, BrawlerFab ARB Dual Compressor Mount with ARB Dual Compressor, BrawlerFab ARB Air Tank mount with 1-gallon ARB Air Tank, ARB Remote Hose Coupling Kit, ARB Air Hose, all...

brawlerfab.com

 

[crusher]

I removed the plastic air box mount bracket and took that to a local fab shop along with the ARB mounting template. They were able to make a bracket for the dual compressor that used the same mounting holes and bolts in the body of the truck as the stock air box bracket. I no longer have that factory plastic mount in my truck, the compressor mount is in that place now. It was relatively cheap.

The only kit I could find you can buy to mount a compressor in the engine bay is from a TRX. After talking with the owner and exchanging photos and measurements, it seems like it would fit for Rebel trucks, and likely all 5th gen trucks that are using RamAir style intakes. I have not tried it though. You can buy a full kit with brackets, compressor, air tank, etc, or you can buy individual pieces. They mount the compressor above the fuse panel on the drivers side attaching to a heavy duty battery box they make. The compressor air tank ends up where the stock air box was. It seems like a quality piece of kit.

Ultimate Onboard Air System

This is the ultimate onboard air system available for your TRX. Comes complete with the BrawlerFab fabricated battery box, BrawlerFab ARB Dual Compressor Mount with ARB Dual Compressor, BrawlerFab ARB Air Tank mount with 1-gallon ARB Air Tank, ARB Remote Hose Coupling Kit, ARB Air Hose, all...

brawlerfab.com

can you post a pic of your set up

 

[JDHarris]

can you post a pic of your set up

The truck is at the dealer getting some work done at the moment. I can post a pic when I get it back.

 

[ROB12013]

I recently replaced my factory air box with the MOPAR Ramair CAI. This left a large space on the passenger side in the engine bay. It was suggested that I could put an air compressor in there. I like that idea but can’t find any mounts on line for the set-up. Does anyone here know how to get a secure set-up for an air compressor where the intake box was and maybe a train horn?

This is the vacated space…
View attachment 144981

 

[ROB12013]

I added a 1 gallon air tank today

 

[blacksheep37]

I added a 1 gallon air tank today

Do you have part numbers for the mounts? Specifically the tank and tank mount? Thanks!

 

[31RamIt]

Do you have part numbers for the mounts? Specifically the tank and tank mount? Thanks!

19+ 5th Generation RAM 1500 Engine Bay Compressor Mount

Passenger side engine bay compressor mount for 5th Gen 5.7L Hemi powered 1500 trucks with or without eTorque. New configuration for ARB Dual Compressor, ARB Single Compressor. Whether you are off-roading and need to air up/down or out at the lake with the family and need to blow up those floats...

www.nhoverland.com

HIGH PERFORMANCE TWIN ON-BOARD COMPRESSOR - 12V

ARB MAXIMUM OUTPUT ON-BOARD COMPRESSOR. Providing optimum power, the ARB twin motor design delivers class-leading air flow for fast inflation purposes. Constructed of lightweight, high-strength engineering grade materials, it incorporates quality components for quiet operation and extended...

www.nhoverland.com

NH Overland has updated ones.

 

[Malodave]

I designed my own to go on my '08 Big Horn 5.7 Hemi. It mounts a York 210 AC compressor to
the Engine. I had a ViAir 380c. It took 23 minutes to fill my 9 Gal tank to 200 PSI. The York
could do the same in 3 minutes at Idle.

I have a Sanden AC compressor to put on my '21 Ecodiesel and have to design the brackets and pulley
for it. Then move the Nathan Airchime K5LA train horns over to it.

Malodave

 

[ROB12013]

Do you have part numbers for the mounts? Specifically the tank and tank mount? Thanks!

VIAIR 91014​

I just mounted it to a piece of aluminum angle