5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Diode Dynamics Elite Fogs

Nice! I've been dying to install mine but too much going on lately haha.
 
I got them installed tonight. Install was super simple. Total of 6 screws to remove.

BF9D908A-535D-43C3-B1BA-F3D4D835AE3D.jpegD6F52D62-CA3F-474D-A65D-E4B667E957DE.jpeg

Start with the lower fender well (I suggest turning your wheels all the way to one direction)

B7CA10F8-4849-442F-80B8-20C30F5F9CF7.jpeg
Swing the fender will out of the way and you will see the foglights. Slide the red locking tab down and press the button to remove the wiring harness. After that remove the 3 screws and the foglight will pull right out.
E40646A0-6457-4DA4-A108-2380A9A85176.jpeg

Put the new light back in and reverse to install. Test the lights before you put anything back together. Mine did not work at first and I had to flip the plug over to get them to come on.
E36B673B-E2F3-4E3D-8060-460E69047F35.jpeg8E3B6164-BC52-48E0-83E2-E95C02F04084.jpeg
 
It looks like your truck didn’t come factory with LEDs. What headlight do you have ?

Looking good tho!
 
It looks like your truck didn’t come factory with LEDs. What headlight do you have ?

Looking good tho!
It’s did not. They are the Alpharex Luxx. Extremely happy with them. I needed the foglights to match them.

I did led bulbs in a previous vehicle, but regularly got flashed because they were too bright for on coming traffic. These put more light where I need it without blinding other drivers.
 
I got them installed tonight. Install was super simple. Total of 6 screws to remove.

View attachment 137555View attachment 137556

Start with the lower fender well (I suggest turning your wheels all the way to one direction)

View attachment 137559
Swing the fender will out of the way and you will see the foglights. Slide the red locking tab down and press the button to remove the wiring harness. After that remove the 3 screws and the foglight will pull right out.
View attachment 137554

Put the new light back in and reverse to install. Test the lights before you put anything back together. Mine did not work at first and I had to flip the plug over to get them to come on.
View attachment 137558View attachment 137557
Looks good! I gotta swap the bezels on mine too. I'll be off for the next couple weeks starting Friday when my wife has this last baby so I will hopefully get to it then haha. On top of a hub for one car and rebuilding a caliper on a different car, it's never-ending lol!
 

Users who are viewing this thread

Back
Top