Diode Dynamic LED not fitting

[Gottabdxheese]

Finally got around to installing (or trying) highs, lows, fog replacement leds from diode dynamics. Went with DD because I like that they are made in the USA. Expensive but hopefully worth it. Fog lights install was simple. No issues. Great fit and the harness clips/locks worked. Lows (H11) I was able to get the bulb to fit in the housing, but anti flicker module would not physically connect to the Ram wire harness. I ended up just leaving off the anti flicker module (we’ll see how that goes). I plugged the led directly into the truck wiring. LEDs work but not a good fit with the connection. The locking mechanisms didn’t work with the DD bulb. Hope it doesn’t wiggle loose. Highs (9005) I could not get the collar to fit. Not sure what the problem since there is very little room to see anything. I gave up on the Highs today and will try again another time. Anyone else install Diode Dynamics? What was your experience?

 

[Gottabdxheese]

I’ve all but given up on these. Tried again this weekend with no success. I believe the way the DD housing is designed, it rubs against a screw in the headlight housing preventing them from locking in place. Hoping DD will approve my refund and I’ll get some Morimottos instead

 

[Gottabdxheese]

Really hoping someone out there has experience with these. Just heard back from Amazon seller that they won’t accept a return because I’m just passed the 30days. Shame on me for ordering and not getting around to installing for 4 weeks I guess.

 

[brawler1588]

No experience with these but when I have issues with light installs I try swapping the stock oring on the new lights.

Sent from my SM-G965U using Tapatalk

 

[deanfx]

I ended up paying the dealer to install the DD low beams in my truck. They took the grille off to get the anti-flicker modules in and said it was a huge pain in the ***. I'm not doing the high beams as I don't think many people do.

On another note, these low's are extremely bright. Are you re-aiming your lights?

 

[brawler1588]

Yes I was getting flashed a lot so I did this,

, i shoved the anti flicker module in the headlight housing. The high beams don't require the anti flicker and are easier to do.

Sent from my SM-G965U using Tapatalk