Couple things I did this weekend

[Dj0mladen]

- puddle lights on each side as you u lock the car they come in and go away when you lock it
- Rough Country grill led lights
- Led Bar in small under grill
- Raptor lights in the grill they come on as your turn position lights.

 

[Dj0mladen]

Puddle

 

[LoNeStAr]

Nice work. I want to do the grill led’s and the lower grill light bar. The light bar looks pretty simple, how hard were the grill lights?

 

[Dj0mladen]

Nice work. I want to do the grill led’s and the lower grill light bar. The light bar looks pretty simple, how hard were the grill lights?

I would say the hardest part was taking off those little pieces of plastic under each light. The stupid clips are stuck in there pretty darn good. Once you have the grill off is pretty easy. I used Dremel tool to cur the little plastic. I think I will use Luxe light vinyl wrap to wrap them as it will be almost likle blackout and than when you turn the light on it just goes through it. Kind of like
My taillights.

 

[LoNeStAr]

I like the taillights as well

 

[MarvsAMartian]

- puddle lights on each side as you u lock the car they come in and go away when you lock it
- Rough Country grill led lights
- Led Bar in small under grill
- Raptor lights in the grill they come on as your turn position lights.

Damn that's slick. I've literally thought about doing everything you did on mine at some point minus the Raptor lights. Didn't even consider them but now... I hesitate only because I really don't wanna cut up my grille to install those lights on either side of the RAM logo. Great spot for the buttons too. Was that an easy wiring job? And where did you mount the puddle lights?

 

[Dj0mladen]

Damn that's slick. I've literally thought about doing everything you did on mine at some point minus the Raptor lights. Didn't even consider them but now... I hesitate only because I really don't wanna cut up my grille to install those lights on either side of the RAM logo. Great spot for the buttons too. Was that an easy wiring job? And where did you mount the puddle lights?

It wasnt bad to wire this whole thing. For raptor lights I used these and there easy spots for them inside the grill.
Brand: Partsam
4.3 out of 5 stars 232 Reviews
Partsam 2 3/4" Smoked Amber LED Marker Bullet Light/Rubber Grommet 1 LED for Truck Pickups Flush Mount

 

[Dj0mladen]

Here is how switches for led bar and led grill lights look at night when they are on. I did two different color so I know which one is which.

 

[Dramrod]

How and what did you use for the puddle lights?!

 

[Dj0mladen]

1" Round Wired LED Accent Light - IP65 - 155 Lumens - 3000K / 4000K / 6500K

Add discreet accent lighting to motorcycles and cars with the 1" round LED accent light. Designed with an ultra-compact waterproof housing, mount the light in doors, engine bays, or nearly anywhere else on vehicles using the included 3M™ adhesive backing. The compact light delivers a wide 90°...

www.superbrightleds.com

Off Road LED Rock Lights - Waterproof - Wide Angle - 213 Lumens

These off-road LED rock lights provide undercarriage lighting for crossing rough terrain or mount for truck bed lighting. The epoxy-sealed aluminum housing and polycarbonate lens protect internal components from extreme conditions. A rugged, waterproof construction also makes these lights ideal...

www.superbrightleds.com

It is easy to get them hooked up.