5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Biggest tires on stock suspension/stock 20 inch rims

DK04

Active Member
Joined
Oct 26, 2018
Messages
32
Reaction score
2
Points
8
Age
40
What’s the biggest tires you can fit on stock 20’s 2019 ram laramie? Anyone have pictures? Looking to do Nitto terragrappler g2
 
Looks good! How’s the ride and noise with those tires?
EvoRAM-... Superb! Now I have never been in a vehicle with "noisey" tires and When I purchased these nitto ridge grapplers I was a bit worried and i can say they are just as Silent as my stock goodyears. Ride quality..... eh, you can notice a slight change nothing severe but highly tolerable. Love These Tires,
 
So the question was never answered here. Nobody knows? One guy seems to have fit 33s. would a 34 diameter tire fit on a 20 inch stock rim? No lift?
 
I'm curious about this as well,Ill probably run the nexens until they wear out. I thought I saw a metric max size on this forum somewhere.
 
i currently run 33x12.50 all terrians on my stock 20 inch rims, they fit perfect with no rubbing
 
Thank you!

watch out though I do a lot of highway driving and I'm usually on cruise control doing 75(my round trip is about 100 miles) and i lost a 2 mpg but hey they look good and they're great for all the snow months we get in the mid west
 
Are you sure the sidewalk doesn’t rub on the UCA with those 12.5s ? I run 295-65-20 on stock Laramie rims. which is 35.1x 11.6x 20 and I can barely get the thickest part of my pinky finger in that space.
 
I have 33x12.50r 20s on my factory ram limited wheels. Fits great no rubbing at all. I do have pics if you want to see what the Toyo R/T's look like.
Put up a pick!!!
 
I have 33x12.50r 20s on my factory ram limited wheels. Fits great no rubbing at all. I do have pics if you want to see what the Toyo R/T's look like.
Yes please let’s see how they look
 
Sorry for late response, here are a few pics. Also a pic of what the factory tire and the R/T looked like while at the tire store.
 

Attachments

  • 20180826_192159.jpg
    20180826_192159.jpg
    1.5 MB · Views: 2,572
  • 20180826_192155.jpg
    20180826_192155.jpg
    1.7 MB · Views: 2,552
  • 20180903_123904.jpg
    20180903_123904.jpg
    1.7 MB · Views: 2,680
  • Screenshot_20180821-001854_Gallery.jpg
    Screenshot_20180821-001854_Gallery.jpg
    930.7 KB · Views: 2,478
  • Screenshot_20180811-125923_Gallery.jpg
    Screenshot_20180811-125923_Gallery.jpg
    1.6 MB · Views: 2,373
  • 20180811_125529.jpg
    20180811_125529.jpg
    1.7 MB · Views: 2,355
  • 20180826_180116.jpg
    20180826_180116.jpg
    2.7 MB · Views: 2,494
Another late response. The answer is not quite straightforward because a 33" tire may be wider and fit fine while a 35" tire would need to be more narrow to fit right. So, I think the answer is do you want it to be wider or taller? There are a number of sizes that might be considered the largest tires that will fit. A resource I have used to try to figure this out is the tire size calculator on tiresize.com. The calculator has an offset calculator too so you can also look at wheel offset. I believe the stock 20" wheel is a +19mm offset. I'm not sure spacers are the way to go but it may allow you to go up a size by moving the wheel out a few mm.
 
2019 rebel aftermarket wheels and tires finally. Wanted a aggressive wide stance this truck deserves.
 

Attachments

  • 47B46D91-87F5-4940-8D80-D4308BC63C55.jpeg
    47B46D91-87F5-4940-8D80-D4308BC63C55.jpeg
    1.4 MB · Views: 1,095
  • AC61AAC2-F7F3-4BD7-9A8D-466F19EA57A0.jpeg
    AC61AAC2-F7F3-4BD7-9A8D-466F19EA57A0.jpeg
    1.4 MB · Views: 1,197
  • FF9436AC-1103-4EA9-B1F8-F6FFE8D1384B.jpeg
    FF9436AC-1103-4EA9-B1F8-F6FFE8D1384B.jpeg
    1.2 MB · Views: 1,192
Running Nitto Ridge Grappler 35/11.50/20 on stock rims.
82166696f540618f6bf1acb20520ec90.jpg
cc83c7475fc2fc7c3fde319cecb6cd0a.jpg



Sent from my iPhone using Tapatalk
 
OUscott1 - Nice. That looks good. Any rubbing? Did you use any spacers?
 

Users who are viewing this thread

Back
Top