5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Bell tech 0-3” adjustable strut

Kwalker88

Member
Joined
Dec 1, 2021
Messages
11
Reaction score
3
Just installed this with sky jacker UCA, set on 2” setting called bell tech to confirm needed rings. Put everything back together and had a total of 3” of level I had one black 15mm spacer and 1 silver 16mm spacer left for each side. Not sure how this happened anyone else have this problem, will be aligning tomorrow.
before fender height 295/70/18
front 37 3/4
Rear 39 1/2
After
Front 40 1/2
Rear 39 3/4
Now it has 3/4 of rake. Don’t under stand it. Will be returning 295s for 35x12.50x18 and leveling rear 1” now..
 

ecke555

Member
Joined
Aug 26, 2020
Messages
15
Reaction score
5
Does your truck have the Offroad Package? If so the Offroad Package springs will give you a extra 1 inch of lift.
 

Kwalker88

Member
Joined
Dec 1, 2021
Messages
11
Reaction score
3
No off-road package, I drove the truck 10 miles it settled back down and is now reading dead level! More than satisfied the truck drives and responds great better than stock. Still needing alignment tomorrow will post pics
 

Kwalker88

Member
Joined
Dec 1, 2021
Messages
11
Reaction score
3
295/70/18 18x9 slight rub on mud flap, if she still runs after alignment might swap out for 285/75/18
 

Attachments

  • image.jpg
    image.jpg
    184 KB · Views: 30
  • image.jpg
    image.jpg
    120.9 KB · Views: 30
  • image.jpg
    image.jpg
    139.8 KB · Views: 22
  • image.jpg
    image.jpg
    145.4 KB · Views: 30

Kwalker88

Member
Joined
Dec 1, 2021
Messages
11
Reaction score
3
Also wondering if putting a little rake back in the rear would eliminate this rub (3/4-1”) because I had these wheels and tires stock and they cleared fine (close)
 

Users who are viewing this thread

Top