5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

BDS 6" Coil over Lift Kit 19 1500 4WD

RatedZ

New Member
Joined
Dec 19, 2019
Messages
2
Reaction score
0
Hello, looking to get an approximate height of the truck with the a BDS 6" coilover lift kit on a 2019? Could it clear a 7'2" height restriction at a car wash? Thanks.
 

Waitforit0045

Active Member
Joined
Sep 12, 2020
Messages
48
Reaction score
70
Location
Cornelia, GA
I have a Zone 6" so the height will be just about the same.

The height will have several factors to consider, namely being the tire size and amount of air. For every 2" of tire will be about 1" of height gain.

I have 35" tires with about 40lbs. The height of my truck is almost right at 7 ft plus about 3 inches for the antenna fin.

So to answer your question, my personal setup would need over 7'3" to clear with no one in the truck.

Sent from my SM-G975U using Tapatalk
 

Users who are viewing this thread

Top