BAK Revolver X4 w Rambox installed.

[Webbd30]

Just knocked out my revolver X4 install on my Laramie with Rambox.

I know there were issues in early production but that has been resolved.

Mine was produced after February 15th FYI.

Use lots of WD40 and be patient the rails will slide in. You will also need 2 people to do it safely.

Best!

Bay Area, California- 2019 RAM 1500 Laramie Crew 4x4, 5'7 Bed, Granite Chrystal, E locker, Black Interior, 5.7 Hemi, 3.92 axle, Level 2 Equip Group, 12in NAV, Advanced Safety Group, Pano Sun Roof, Bed Utility Group, Air suspension, Off Road Group, 20X9 +1 Fuel wheels, 275/65R20 Nitto Ridge Grapplers, Deployable bed step, 33 gallon tank, Ram Box, Trailer break control, Mopar Slush Mats.

Sent from my iPhone using Tapatalk

 

[REBEL 2.0]

Looks good, hey does the cover touch the lids when they’re up at all? Could you please show any more pics you have. Thx

 

[Kinger124]

Got the same cover sitting in my garage waiting for my truck to get to the dealer.

 

[Webbd30]

Looks good, hey does the cover touch the lids when they’re up at all? Could you please show any more pics you have. Thx

I will take some more pictures tonight if you'd like. I will get as many angles as possible.

 

[Webbd30]

Got the same cover sitting in my garage waiting for my truck to get to the dealer.

you made a good buy!

 

[Webbd30]

Got the same cover sitting in my garage waiting for my truck to get to the dealer.

Bay Area, California- 2019 RAM 1500 Laramie Crew 4x4, 5'7 Bed, Granite Chrystal, E locker, Black Interior, 5.7 Hemi, 3.92 axle, Level 2 Equip Group, 12in NAV, Advanced Safety Group, Pano Sun Roof, Bed Utility Group, Air suspension, Off Road Group, 20X9 +1 Fuel wheels, 275/65R20 Nitto Ridge Grapplers, Deployable bed step, 33 gallon tank, Ram Box, Trailer break control, Mopar Slush Mats.

Sent from my iPhone using Tapatalk

 

[REBEL 2.0]

Thx, good clear photos. I have the revolver on my 12 Ram 3500 with out Rambox and overall happy. Hail storm destroyed my Backflip

 

[pinkerton]

I tried to install my MX4 over the weekend and there is no way I can get those rails to slide on. I used silicone lube, extra hands, light hammer, etc. I either have the wrong rails or am incompetent (and don't like either answer).

 

[Webbd30]

I tried to install my MX4 over the weekend and there is no way I can get those rails to slide on. I used silicone lube, extra hands, light hammer, etc. I either have the wrong rails or am incompetent (and don't like either answer).

That has happened in the past.

when was the build date?

and I encourage you to reach out to both the company you purchased from and BAK directly. They have really good customer service and will ensure you get the updated rails.

best,

 

[macallien]

Bay Area, California- 2019 RAM 1500 Laramie Crew 4x4, 5'7 Bed, Granite Chrystal, E locker, Black Interior, 5.7 Hemi, 3.92 axle, Level 2 Equip Group, 12in NAV, Advanced Safety Group, Pano Sun Roof, Bed Utility Group, Air suspension, Off Road Group, 20X9 +1 Fuel wheels, 275/65R20 Nitto Ridge Grapplers, Deployable bed step, 33 gallon tank, Ram Box, Trailer break control, Mopar Slush Mats.

Sent from my iPhone using Tapatalk

Sorry to bother.. Do u have a pic with the cover and and tailgate closed? Also can you open the tailgate with the cover fully on?

 

[pinkerton]

That has happened in the past.

when was the build date?

and I encourage you to reach out to both the company you purchased from and BAK directly. They have really good customer service and will ensure you get the updated rails.

best,

My build date was 12-18. TFO has not been available by phone all day. I sent an email to Shaun early this am and have not heard back from him either

 

[Webbd30]

weird shaun has always been responsive. and with that build date I believe you have the wrong rails. have you contacted BAK? that should be your next step.

 

[pinkerton]

weird shaun has always been responsive. and with that build date I believe you have the wrong rails. have you contacted BAK? that should be your next step.

Shaun replied and Bak is sending out new rails. It's ridiculous that they can't get this right but hopefully the replacements will work

 

[Webbd30]

Sorry to bother.. Do u have a pic with the cover and and tailgate closed? Also can you open the tailgate with the cover fully on?

Sorry only had this one I can take more in the AM.

Yes you have full access to the bed with the cover closed.




Bay Area, California- 2019 RAM 1500 Laramie Crew 4x4, 5'7 Bed, Granite Chrystal, E locker, Black Interior, 5.7 Hemi, 3.92 axle, Level 2 Equip Group, 12in NAV, Advanced Safety Group, Pano Sun Roof, Bed Utility Group, Air suspension, Off Road Group, 20X9 +1 Fuel wheels, 275/65R20 Nitto Ridge Grapplers, Deployable bed step, 33 gallon tank, Ram Box, Trailer break control, Mopar Slush Mats.

Sent from my iPhone using Tapatalk

 

[trixdesigns]

Shaun replied and Bak is sending out new rails. It's ridiculous that they can't get this right but hopefully the replacements will work

They have gotten it right, you received new old stock (ie: something that was sitting on the shelf). I ordered from Truck Alterations last week and my MX4 arrived this week with a build date of 3/1/2019 so I’m expecting mine will already have the new rails. Waiting on the dealer to fix my truck before I can tell for sure.


Sent from my iPhone using Tapatalk

 

[DaMythDaLegend]

hows the water penetration?

 

[Webbd30]

Very Very minimal. nowhere near an issue for 99.98% of people.

 

[speedracernc]

I was looking at getting one of these however the website says the silver cargo rails should be silver. My rails are black. Does anyone know what the difference is? Why would I have black one's?
thanks

 

[Ellisstrong]

I was looking at getting one of these however the website says the silver cargo rails should be silver. My rails are black. Does anyone know what the difference is? Why would I have black one's?
thanks

I believe the black rails are if you had the factory tonneau cover

 

[speedracernc]

I believe the black rails are if you had the factory tonneau cover

I imagine that I would need to buy new rails then if I want to ditch the OEM cover. Anyone with part numbers please list them if you get a chance.