5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Any luck adding ventilated seats to rebel 12 with leather?

Neokane

Well-Known Member
Joined
Feb 11, 2019
Messages
348
Reaction score
138
I'd really like to see if this is possible or if anyone else has looked into or done this
 

Bigtone

Active Member
Joined
May 2, 2019
Messages
109
Reaction score
87
Location
NE PA
I added heated and cooled leather seats to my 2010 ram. They were basically plus and play, but after adding the switches, the indicator leds did not function. 2 dealers tried to get them to function but could not. One dealer called the ram tech assist and chrysler made them stop working on it, stating that adding the seats violated some type of build restriction. In short, I would worry about warranty issues if you tried to add the ventilated seats.
 

Neokane

Well-Known Member
Joined
Feb 11, 2019
Messages
348
Reaction score
138
So, looking at parts diagrams, it appears that 4 parts are needed per seat, then a reprogram to show up on the controls tab of uconnect.

BLOWER. SEAT BACK. - 68267093AC - $84.94
VENTILATION BAG. Seat Back - 68267089AB - $31.40
BLOWER. SEAT CUSHION. - 68267092AD - $86.23
VENTILATION BAG. Seat Cushion. - 68267081AC - $41.81

$244.38 plus reprogram. (per seat)

Looks like the build codes are
CAJ VENTILATED FRONT SEATS
X8Z SEAT PARTS MODULE
 

Ranger

Active Member
Joined
Jun 8, 2019
Messages
42
Reaction score
36
An alternative to retrofitting OEM parts is to go to a Katskinz installer. They have heated and cooled add-ons for leather upholstery installs. If you're unhappy with your leather at all (color, stitching, quality) then aftermarket becomes a better solution for getting ventilated seats. UConnect integration is highly unlikely, but might be worth a quick research to compare against OEM
 

Jharck

New Member
Joined
Aug 15, 2021
Messages
3
Reaction score
0
So, looking at parts diagrams, it appears that 4 parts are needed per seat, then a reprogram to show up on the controls tab of uconnect.

BLOWER. SEAT BACK. - 68267093AC - $84.94
VENTILATION BAG. Seat Back - 68267089AB - $31.40
BLOWER. SEAT CUSHION. - 68267092AD - $86.23
VENTILATION BAG. Seat Cushion. - 68267081AC - $41.81

$244.38 plus reprogram. (per seat)

Looks like the build codes are
CAJ VENTILATED FRONT SEATS
X8Z SEAT PARTS MODULE
Do you know if anyone has tried this?
 

dieselscout80

New Member
Joined
Jun 21, 2022
Messages
3
Reaction score
1
I wonder if theese seat vent fans would be able to move air through the cloth sea fabric of a Bighorn?
 

Daverous

Well-Known Member
Joined
Sep 14, 2020
Messages
384
Reaction score
244
I just swapped covers over. A little time consuming but very straight forward. Alfaobd and boom, functional with zero wiring changes.
 

Cesar592

Active Member
Joined
Apr 20, 2021
Messages
151
Reaction score
29
The harness was already there or did you make it and what is the module?
 

Users who are viewing this thread

Top