5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Alignment question

Another Money Pit

Active Member
Joined
Oct 15, 2021
Messages
174
Reaction score
110
Points
43
Age
47
Location
WI
So I had to put a .25 wheel Spacer on my stock 21 Laramie rim to prevent tire rub on my uca after adding a 3.5 lift kit. I think I already know the answer to this but I thought I would ask the truck guru's on here. So will I need to get another alignment or will the .25 Spacer not effect that at all? The only time the tire rubbed was when I was going around tight corners at high speed and my ABS light would come on

Thanks
 
The only time the tire rubbed was when I was going around tight corners at high speed and my ABS light would come on

Thanks
The part I quoted sounds strange, but to answer your question, adding a wheel spacer doesn’t necessitate an alignment. The only thing you should do is re-check torque of the wheel after 50 or so miles of driving after install.
 
The spacer should have negligible effect, but the lift might.
 
The spacer should have negligible effect, but the lift might.
I already had the lift on before this. It was a tight gap between the tire and uca but now with the Spacer more peice of mind that it's not going to rub.
 

Users who are viewing this thread

Back
Top