grizzlygoalie
Member
- Joined
- Jul 22, 2024
- Messages
- 8
- Reaction score
- 0
- Points
- 1
- Age
- 39
Installed some aftermarket LEDs in the bed a few months back - Working great, taped into constant power going to the 8pin trailer, and ground going to the LED break/turn signal strip under the tail gate.
Got the bright idea to change the button to turn it on and now They are dead.
When changing the switch - did get some sparks when wiring up - should have unpulgged the battery.
Re wired everything now and still dead - power to the trailer hitch is still hot, and the break light is working still.
Any ideas where to trace back? I've rewired everything -even tried a new set of LEDS and its just dead...
Got the bright idea to change the button to turn it on and now They are dead.
When changing the switch - did get some sparks when wiring up - should have unpulgged the battery.
Re wired everything now and still dead - power to the trailer hitch is still hot, and the break light is working still.
Any ideas where to trace back? I've rewired everything -even tried a new set of LEDS and its just dead...
