Adding 360 Surround camera for 2019-21 1500 Rebel

[damianluna30]

Remove glass
Remove four screws behind glass
(Three fine thread and one course thread)
Remove colored cap (4 press clips)
remove screws holding plastic to metal bracket
Separate and remove plastic halves
Starting at the turn signal working toward the hinge and then over the top.
There are tabs at the hinge on top.

Unplug wires as needed.

Do you have the link to the tool i need to take the glass out, and thanks!

 

[vincentw56]

Do you have the link to the tool i need to take the glass out, and thanks!

There's no tool. Search YouTube for videos. You can also use this tool to pull it off or to help.

https://www.amazon.com/dp/B000GKD6X2?ref=ppx_pop_mob_ap_share

 

[J-barcarp]

Be careful removing glass.
I broke two being impatient.

 

[damianluna30]

Thanks, ive been watching a few videos on you tube, still waiting on a few parts to commence the install, once i get to that part the next will be running the camera cable down the door and into the cabin area to connect to the CVPM, been reading on that too


Sent from my iPhone using Tapatalk

 

[J-barcarp]

I will take some pics tomoro
I have not re assembled the dash yet

 

[damianluna30]

That be awesome!! Please do share!!


Sent from my iPhone using Tapatalk

 

[J-barcarp]

These pics are kinda random but the finger points to the important part.


From the passeger door to the cvpm..


From the cvpm to the radio….

 

[J-barcarp]

From the driver door to the radio or cvpm

 

[J-barcarp]

Obviously pull radio first.
This is a video showing how some guy runs wire through the fire wall and it worked well for me too….