5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

4th gen Bilstein 5100 on 5th gen Q’s

Hambonehead

Active Member
Joined
Sep 1, 2019
Messages
44
Reaction score
28
Points
18
Age
37
Has anyone put a set of 4th gen Bilstein 5100 front struts on a 5th gen and did you have any clearance issues?
 
Another member used the 4th gen. They are about an inch shorter but did work. You won't get the same lift amount, obviously, so you'll need to compensate for that.
 
Another member used the 4th gen. They are about an inch shorter but did work. You won't get the same lift amount, obviously, so you'll need to compensate for that.
Honestly I’m not looking to lift I’m actually looking to lower the front a little and thought these would be a better solution than the maxtrac struts in terms of quality and ride.
 
Honestly I’m not looking to lift I’m actually looking to lower the front a little and thought these would be a better solution than the maxtrac struts in terms of quality and ride.
Did you ever try this?
 

Users who are viewing this thread

Back
Top