2025 Ram interior fuse panel.

[RAMVERNON]

Anyone have a diagram of the internal fuse panel on the 25 Ram? I’m trying to connect a dash cam and I need constant and switched power sources.

 

[firemedic10584]

A test light would be your best bet..

 

[kapinallinen2]

Anyone have a diagram of the internal fuse panel on the 25 Ram? I’m trying to connect a dash cam and I need constant and switched power sources.

Lookey here.New 5th-Gen 1500 Fuse / Relay / Circuit Breaker Diagrams & Documentation

 

[Jimmy07]

Lookey here.New 5th-Gen 1500 Fuse / Relay / Circuit Breaker Diagrams & Documentation

None of that will apply to the 2025 Rams.

 

[Eighty]

The fuse that feeds your 12v cigarette lighter port is shown below. It can be battery fed (position 1) or ignition fed (position 2). Not sure if you're trying to install fuse taps or what, but F54 lets you have either/or.

 

[RAMVERNON]

Thanks, that helps a lot.

 

[RAMVERNON]

They must have changed the internal fuse panel on the 2025 Ram 1500. This is what it looks like. The ID for each fuse is nearly impossible to read.

 

[LOWRMPG]

Maybe this:

 

[JBarry]

I would have it ignition fed.

 

[Ramboy13]

As anyone rung out which two fuses might be preferred? I’d prefer a spare slot if it’s powered correctly.

 

[Whoya55555]

Any consensus on which two fuses are preferred for 12v power and ACC??

 

[Ramboy13]

Any consensus on which two fuses are preferred for 12v power and ACC??

Check this out:

R

Post in thread '2025 Ram 1500 hardwiring dash cam'

Mar 16, 2025

No wiring diagram yet but I did a video on my FitcamX install on my 2025 Limited. At 6:19 in the video is where I cover how I picked the fuses and which one's I used.

Nice job! I installed a Viofo a month or so ago. I didn't remove the metal plate like you did, but I wish I did. I will note that while there doesn't seem to be any fuse maps yet, the cavities are labeled on the fuse block. You can then cross-reference this to the fuse list in the owners manual. It's not as convenient as working with a map, but this can help you avoid circuits you might rather...

• Ramboy13

 

[AmericA]

Check this out:

R

Post in thread '2025 Ram 1500 hardwiring dash cam'

Mar 16, 2025

No wiring diagram yet but I did a video on my FitcamX install on my 2025 Limited. At 6:19 in the video is where I cover how I picked the fuses and which one's I used.

Nice job! I installed a Viofo a month or so ago. I didn't remove the metal plate like you did, but I wish I did. I will note that while there doesn't seem to be any fuse maps yet, the cavities are labeled on the fuse block. You can then cross-reference this to the fuse list in the owners manual. It's not as convenient as working with a map, but this can help you avoid circuits you might rather...

• Ramboy13

I am searching for the same info to hardwire my dashcam with parking mode. From what I found, read and tried to leverage chatgpt on, Looks like Fuse 53 for direct power and Fuse 66 for ACC. I'd love someone to validate though before I do it.