2025 Ram 1500 Rebel leveling kit

[Jsemerdjian]

Hi everyone

I recently bought a 2025 1500 Rebel

I have been searching all over and cannot find a leveling kit for the 2025

I spoken to a few people that installed the Rough Country and Motofab 2" pucks from the 2024 and they said they had no issues but everything I read online and I even called 4 wheel parts and no one has confirmed the 2024 model and 2025 on the same so I don't want to install a 24 model part on my 25 unless I know its safe.

 

[SD Rebel]

Hi everyone

I recently bought a 2025 1500 Rebel

I have been searching all over and cannot find a leveling kit for the 2025

I spoken to a few people that installed the Rough Country and Motofab 2" pucks from the 2024 and they said they had no issues but everything I read online and I even called 4 wheel parts and no one has confirmed the 2024 model and 2025 on the same so I don't want to install a 24 model part on my 25 unless I know its safe.

Congratulations on your new truck.

There is no suspension differences between a 2019-2024 to 2025, whatever fits the pre-facelift will fit the facelift models.

The only thing I can think of that could be a concern is the weight differences between the 5.7L vs 3.0LTT when it comes to spring rates, not like aftermarket companies even took into account the weight differences between a 3.6L Pentastar vs 5.7L Hemi to begin with, much less the Hurricane.

Since you are just installing pucks, it matters even less.

 

[Thegoat93]

Hi everyone

I recently bought a 2025 1500 Rebel

I have been searching all over and cannot find a leveling kit for the 2025

I spoken to a few people that installed the Rough Country and Motofab 2" pucks from the 2024 and they said they had no issues but everything I read online and I even called 4 wheel parts and no one has confirmed the 2024 model and 2025 on the same so I don't want to install a 24 model part on my 25 unless I know its safe.

Were you able to find anything? I am having the same issues with not much help from the dealership. I was told that they can't do a level unless it is 22' or less from the center of the hub to the bottom of the fender. It is 23" and i was left with them saying no options other than full suspension lift. The only made one phone call and "Google" was their recommendation.

 

[Gregbj33]

I went with RC 3.5” struts and new UCAs and 2” Motofab spring spacer for the back. Everything fits and looks really good. On my 22 I used the bilatein read springs which gave it 1”-1.5” in back and still seemed a bit nose high when you really stared at it. Between that experience and knowing the engine is lighter I think 1.5” is the difference in factory rake on the 25s. Mine is a big horn though so maybe rebel is slightly different. My point…..a 2.5” “leveling” option may have you nose high, without adding to the rear.