5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2025 Ram 1500 Limited Sub/Amp Install

Anyone have the wiring diagram for the subwoofer connection?
 
I dropped the ball and don't seem to have a close up picture of the sub wiring. The factory sub is a dual voice coil subwoofer. If you pull the sub from the enclosure, you can identify the left and right pairs. They wiring inside the closure is a different color from the wires feeding the sub plug. This picture at least shows the sub enclosure and wiring connector.

View attachment 193982
By chance do you recall the wire colors for each sub coil? And are they 2 ohm coils?
 
i have a 2019 with the alpine so the harmon and the alpine are the same as far as i can tell from 2019-up so the bast thing to do is forget about the amp pro get a dsp and remove the factory amp totally there are 2 plug and play dsp's all the work is done under the driver seat
rockford dsr1 and the Hertz SPL Show S8 DSP i went with the rockford
 
Last edited:
i have a 2019 with the alpine so the harmon and the alpine are the same as far as i can tell from 2019-up so the bast thing to do is forget about the amp pro get a dsp and remove the factory amp totally there are 2 plug and play dsp's all the work is done under the driver seat
rockford dsr1 and the Hertz SPL Show S8 DSP i went with the rockford
I’m just looking to connect a sub to the factory amp for now until PAC builds a module for it. I got an audiofrog 12 that’s very sensitive so it should be fine for a while. I have two pairs at the sub. Green brown/green white and grey brown/grey white. Obviously the greys are a pair and greens are a pair, just not sure which is positive and negative.
 
I’m just looking to connect a sub to the factory amp for now until PAC builds a module for it. I got an audiofrog 12 that’s very sensitive so it should be fine for a while. I have two pairs at the sub. Green brown/green white and grey brown/grey white. Obviously the greys are a pair and greens are a pair, just not sure which is positive and negative.
i think you wrong it's opposite the whites are a set and the brown's are a set
Voice Coil 1 is gray/brown (+) and green/brown (-), Voice Coil 2 is gray/orange (+) and green/orange (-), and Voice Coil 3 is gray/white (+) and green/white (-)
to me it looks like, try it
gray/brown (+)
green/brown (-)
gray/white (+)
green/white (-)
 

Users who are viewing this thread

Back
Top