5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2025+ MOPAR power steps install

The ones you linked aren't a retrofit, they're a direct fit. You just bolt them on on, connect the wiring and have a dealer program them. I installed them on my '25 Rebel.

Installation instructions attached.
 

Attachments

I paid $1573 for the steps, but the price varies between dealers (sometimes quite a bit). That was the cheapest I could find within a reasonable driving distance. Small town dealer, they did the programming for free.
 
I paid $1573 for the steps, but the price varies between dealers (sometimes quite a bit). That was the cheapest I could find within a reasonable driving distance. Small town dealer, they did the programming for free.
how long did it take you to bolt and wire?
 
The bolt on part takes minutes. The studs are already on the truck, you simply lift the boards up on bolt them on. That's the easy part.

The wiring took a couple of hours. I skipped a few steps, for example I didn't take off the wheel well liners, etc. I just snaked the wiring down along them which saves some time and effort, but makes getting at that grommet on page 9 kind of a PIA.

Taking the wire blocks apart (page 10, 11 and 12) is honestly the hardest part. I was kind of paranoid about not making any mistakes here. Just take your time.
 

Users who are viewing this thread

Back
Top