2025 Alpine Dash Corner Speakers

[Hb92]

On a '22 I ran a 4 ohm with 300Hz blocker.

Anyone know if the amplifier/stereo changed at all?
Are those specs still applicable?

Crutchfield says it's been a 2.7Ohm impedance since at least '22, but I did not notice any volume loss using the 4 ohm as described. So, unless someone knows something new for the '25, I'm planning to just re-order the same stuff. Thx

 

[Hb92]

FYI, the best (for the $) upgrade you can make to the alpine system is simply changing your corner speakers. They are 4ohm:

 

[CHeYeNNe71]

I thought someone posted about the wiring adapters being different on the 25+

 

[70sgeek]

The 72-7902 adapters are correct for the dash corner speakers. I did an Infinity swap on my '25 and that's what Crutchfield supplied with them for direct retro-fit.

 

[1791]

300htz with a 6db slope is kinda low for a 3.5. i would not go below 500 htz
i have mine set at 750htz with a 18db slope but i am also throwing a pretty good bit of power at them.